RPM Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the optional RPM Wide Front Bumper
for the Traxxas Rustler, Stampede, Nitro Sport and Bandit.

FEATURES:
Includes additional 1/2" (13mm) defense to front end
Nylon blend construction, red in color

CONSISTS OF:
Wide Front Bumper

SPECS:
Width: 6.2" (157mm)
Length: 2.7" (70mm) from rear of installing location to outside edge

Want another excellent item to enhance the above discussed item?

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at rear of chassis to prevent automobile from flipping over
    during wheelies

CONSISTS OF:
Assembled optional Wheelie Bar with installing directions and
    hardware

NEEDS:
Fastening to rear of chassis

Lots of others have purchased this item along with the item that you are currently reviewing.



This is a standard replacement Antenna Tube with Cap from Dubro.
This item can be used anywhere an antenna tube is required to support
a receiver antenna wire.

FEATURES:
Red plastic construction

CONSISTS OF:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

NEEDS:
Nothing. This is a direct fit part for any boat, automobile, etc. that uses
    a standard size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Diameter: 1/8" (3.2mm)

Right here is a excellent item that many others have purchased the exact same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
2 Front bearing (center) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

The below item likewise sets truly well with the item being talked about.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Versatile plastic construction, green in color

CONSISTS OF:
RPM Wide Front Bumper in Green

SPECS:
Length: 2.7" (70mm) determined at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

This item praises the above talked about item.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Principles Refined Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat dealt with and polished steel construction

CONSISTS OF:
Left and Right King Pins for front suspension

Lots of others have purchased this item along with the item that you are currently reviewing.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Red

These are the optional RPM Strong Back A-Arms in Red
for the Electric Powered Traxxas 2WD Rustler and Stampede.

FEATURES:
Each A-arm is 0.25oz (7g) lighter than stock A-arm
Gets rid of over 0.03" (0.8mm) of slop from the inner arm install
Nylon blend construction, red in color

CONSISTS OF:
Left and Right Rear A-Arms

Want another excellent item to enhance the above discussed item?

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of Strong Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Bandit, Slash and Nitro Slash.

FEATURES:
Composite nylon construction, red in color
Nearly 25% lighter than stock variations
Increased clearance locations in the outer portion permits increased
    droop travel when used with RPM #80372 and #80382 large
    bearing providers

CONSISTS OF:
2 Strong Front-A Arms in Red