RPM Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Car and Safeguards the Chassis.

FEATURES:
Resilient Plastic Construction
Black in Color

CONSISTS OF:
One Bumper
One Team RPM Decal

NEEDS:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

The listed below thing likewise sets really well with the thing being talked about.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to avoid vehicle from turning over
    throughout wheelies

CONSISTS OF:
Assembled optional Wheelie Bar with installing instructions and
    hardware

NEEDS:
Securing to back of chassis

This thing praises the main item below.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is exactly what the
steering knuckles connect to.

FEATURES:
Nylon building, black in color
Stamped right and delegated guarantee correct installation

CONSISTS OF:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and steering knuckles

The listed below thing likewise sets really well with the thing being talked about.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building

CONSISTS OF:
2 Front bearing (hub) carriers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if required use (2) DTXC1547.

Here is one more thing that praises the thing being talked about.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a set of ST Racing Ideas Sleek Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel building

CONSISTS OF:
Left and Right King Pins for front suspension

Here is a wonderful thing that lots of others have actually purchased the same time.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set contains the spring retainers that hold the springs in
place over the shock body and the piston heads that manage the quantity
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on most Traxxas nitro and electric powered vehicles.
Two hole piston moving towards higher dampening or 3 hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and two lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

NEEDS:
Disassembly of shock to install parts.

Here is one more thing that praises the thing being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)