RPM Toe-In Gauge

By making it possible to set the toe in precisely and consistantly, RPM's
toe in gauge permits the racer to obtain more predictable steering. The toe in
guage is formed from black plastic, and will work on all 1/10 scale automobiles and
trucks (utilizing included standoffs).

Consists of: 1 toe in gauge
2 truck standoffs
Complete directions

pcd 5/8/94

This item is regularly acquired with the above mentioned item.



This is the DuraTrax Pit Tech Camber Gauge.

FEATURES:
Easily and precisely determines camber settings in 1° increments from
    10° favorable to 10° negative
Perfect for on-road and off-road automobiles and trucks
Thumb wheel locks gauge settings firmly for accurate adjusments
Consists of ideas for setting the camber to achieve maximum cornering
    performance on any type of track design or surface area
Constructed of black plastic

INCLUDES:
One DuraTrax Pit Tech Camber Gauge

NEEDS:
Adjusting gauge to wanted setting, placing gauge against wheel or
    tire and changing camber linkages till wheel is lined up with the
    gauge on top and bottom

COMMENTS:
Typical off-road buggy and truck settings:
    Front: 1-3° negative
    Back: 0-1° negative
Note: Unfavorable camber prevents the outside edge of the tire from
    rolling under during cornering. However, excessive negative camber
    will cause loss of traction under straight-line acceleration

This is a amazing enhancement to the item presently being gone over.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel centers fit on completion of the stub axles.

FEATURES:
Replaces missing out on or harmed hex wheel centers
Hubs are made from molded black plastic
Axle pins are steel

INCLUDES:
Two Hex Wheel Hubs
Two 2.5x12mm axle pins

NEEDS:
Placing pins through stub axles (4953) and placing wheel centers in
    recessed location of axle providers (4932).