RPM Toe-In Gauge

By making it possible to set the toe in accurately and consistantly, RPM's
toe in gauge permits the racer to get more predictable steering. The toe in
guage is molded from black plastic, and will deal with all 1/10 scale automobiles and
trucks (utilizing consisted of standoffs).

Consists of: 1 toe in gauge
2 truck standoffs
Complete instructions

pcd 5/8/94

This thing is frequently gotten with the above discussed thing.



This is the DuraTrax Pit Tech Camber Gauge.

FEATURES:
Quickly and accurately measures camber settings in 1° increments from
    10° favorable to 10° unfavorable
Suitable for on-road and off-road automobiles and trucks
Thumb wheel locks assess settings securely for exact adjusments
Consists of pointers for setting the camber to attain maximum cornering
    efficiency on any type of track design or surface
Constructed of black plastic

CONSISTS OF:
One DuraTrax Pit Tech Camber Gauge

NEEDS:
Changing gauge to wanted setting, positioning gauge against wheel or
    tire and adjusting camber linkages until wheel is lined up with the
    gauge at the top and bottom

COMMENTS:
Normal off-road buggy and truck settings:
    Front: 1-3° unfavorable
    Rear: 0-1° unfavorable
Keep in mind: Unfavorable camber avoids the outdoors edge of the tire from
    rolling under throughout cornering. However, too much unfavorable camber
    will cause loss of traction under straight-line acceleration

This is a wonderful addition to the thing currently being gone over.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel hubs fit on completion of the stub axles.

FEATURES:
Changes missing out on or harmed hex wheel hubs
Hubs are made from molded black plastic
Axle pins are steel

CONSISTS OF:
2 Hex Wheel Hubs
2 2.5x12mm axle pins

NEEDS:
Inserting pins through stub axles (4953) and positioning wheel hubs in
    recessed location of axle providers (4932).