RPM Toe-In Gauge

By making it possible to set the toe in accurately and consistantly, RPM's
toe in gauge allows the racer to get more predictable steering. The toe in
guage is formed from black plastic, and will deal with all 1/10 scale cars and
trucks (utilizing consisted of standoffs).

Consists of: 1 toe in gauge
2 truck standoffs
Total directions

pcd 5/8/94

This thing is often bought with the above mentioned thing.



This is the DuraTrax Pit Tech Camber Gauge.

FEATURES:
Easily and accurately measures camber settings in 1° increments from
    10° favorable to 10° negative
Ideal for on-road and off-road cars and trucks
Thumb wheel locks evaluate settings firmly for precise adjusments
Consists of ideas for setting the camber to attain optimal cornering
    efficiency on any type of track design or surface
Constructed of black plastic

CONSISTS OF:
One DuraTrax Pit Tech Camber Gauge

NEEDS:
Adjusting gauge to wanted setting, positioning gauge against wheel or
    tire and changing camber linkages till wheel is lined up with the
    gauge on top and bottom

COMMENTS:
Normal off-road buggy and truck settings:
    Front: 1-3° negative
    Rear: 0-1° negative
Note: Negative camber prevents the externally edge of the tire from
    rolling under throughout cornering. Nevertheless, too much negative camber
    will trigger loss of traction under straight-line velocity

This is a superb enhancement to the thing currently being gone over.

Hex Wheel Hubs

This is the Set of Hex Wheel Hubs for the Traxxas T-Maxx 4WD RTR Monster Truck.
These wheel centers fit on completion of the stub axles.

FEATURES:
Replaces missing or damaged hex wheel centers
Hubs are made from molded black plastic
Axle pins are steel

CONSISTS OF:
2 Hex Wheel Hubs
2 2.5x12mm axle pins

NEEDS:
Placing pins through stub axles (4953) and positioning wheel centers in
    recessed location of axle carriers (4932).