RPM Toe-In Gauge

By making it possible to set the toe in properly and consistantly, RPM's
toe in gauge enables the racer to obtain more predictable steering. The toe in
guage is formed from black plastic, and will deal with all 1/10 scale automobiles and
trucks (using included standoffs).

Includes: 1 toe in gauge
2 truck standoffs
Total instructions

pcd 5/8/94

This product is often bought with the above pointed out product.



This is the DuraTrax Pit Tech Camber Gauge.

FEATURES:
Quickly and properly measures camber settings in 1° increments from
    10° favorable to 10° unfavorable
Suitable for on-road and off-road automobiles and trucks
Thumb wheel locks determine settings securely for precise adjusments
Includes suggestions for setting the camber to achieve maximum cornering
    performance on any type of track design or surface
Constructed of black plastic

CONSISTS OF:
One DuraTrax Pit Tech Camber Gauge

REQUIRES:
Changing gauge to desired setting, positioning gauge versus wheel or
    tire and changing camber linkages till wheel is aligned with the
    gauge at the top and bottom

COMMENTS:
Normal off-road buggy and truck settings:
    Front: 1-3° unfavorable
    Rear: 0-1° unfavorable
Note: Negative camber avoids the outside edge of the tire from
    rolling under during cornering. However, excessive unfavorable camber
    will cause loss of traction under straight-line acceleration

This is a wonderful enhancement to the product presently being discussed.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on completion of the stub axles.

FEATURES:
Replaces missing out on or damaged hex wheel hubs
Centers are made from molded black plastic
Axle pins are steel

CONSISTS OF:
2 Hex Wheel Centers
2 2.5x12mm axle pins

REQUIRES:
Placing pins through stub axles (4953) and positioning wheel hubs in
    recessed area of axle carriers (4932).