RPM Sealed Gear Cover, For Traxxas E-Rustler/Stampede 2Wd/Bandit/Sla

This is the optional RPM Gear Cover for the Traxxas Electric Rustler,
Stampede, Bandit, and Slash.

FEATURES:
Nylon building and construction
Blue in color
Fits XL-5 and VXL Versions
Maximum Spur Gear (87 Tooth)

CONSISTS OF:
One Blue Sealed Gear Cover

NEEDS:
Setup on the above mentioned automobiles

SPECS:
Length: 79mm (3.11")
Width: 60mm (2.36")
Height: 35mm (1.38")

COMMENTS:
Also available in Black (RPMC8029)

This thing compliments the above reviewed thing.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural refined color

CONSISTS OF:
Twelve Body Clips

SPECS:
Length: 26mm

Want an additional terrific thing to match the above mentioned thing?

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Density: 0.5mm

This thing compliments the main item here.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Durable nylon reinforced plastic building and construction
Utilizes all stock hardware (for installing shocks etc.)

CONSISTS OF:
One rear shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm

Want an additional terrific thing to match the above mentioned thing?

Bumper Mount, For Traxxas Slash/Rustler/Stampede/Bandit, Blue

This is the optional Rear Bumper Mount from RPM for use on the
    Traxxas Slash, E-Rustler, E-Stampede, and Bandit.

FEATURES:
Nylon building and construction
Blue in color

CONSISTS OF:
One Mount for a Rear Bumper or Wheelie Bar
One 3x10mm Screw
Four 3x12mm Screws
One 3x16mm Screw
Three 3x25mm Screws
One 3mm Locknut
Two RPM Decals

NEEDS:
Setup on the vehicle
2mm Allen Driver for Setup

Frequently acquired with the thing that you are currently checking out.

Rear Bumper, For Traxxas Slash 2Wd, Blue

This is the RPM Rear Bumper for use on the Traxxas Slash.

FEATURES:
Nylon building and construction
Blue in color

CONSISTS OF:
One Left Side Bumper Assistance
One Right Side Bumper Assistance
One Rear Bumper
8 3x16mm Buttonhead Screws

NEEDS:
Setup on the vehicle

COMMENTS:
Also available in:
Black (RPMC0080)
Chrome (RPMC0081)

This is a fantastic enhancement to the thing currently being reviewed.

Blue Gearbox Housing And Rear Mounts For Traxxas 2Wd Vehicles

This is the optional RPM Hybrid Gearbox Housing in Blue
for the Traxxas 1/10 scale 2WD Slash, Stampede, E-Rustler and Bandit.

FEATURES:
0.12" (3mm) thick 6061 T6 aluminum motor plate provides strength to
    lock in gear mesh, and better heat dissipation than stock plastic
    motor plate
Motor plate is separate from rear bumper mounts getting rid of damage to
    the plate in case of a rear accident
Molded nylon gearbox housing with stock bumper installing holes
Different housing and rear mounts permit transmission upkeep
    without affecting suspension settings
0° and 3° molded rear mounts offer tighter tolerances and less slop
    than machined elements for better camber and toe angle retention

CONSISTS OF:
Two Gearbox Real estates, Motor Plate, 2 0° and 2 3° Rear Installs and
    Instructions