RPM Rock Sliders For The Axial Scx10

These are the optional RPM Rock Sliders for the Axial SCX10.

FEATURES:
Molded from strong engineering grade nylons, black in color
Full length with kick-out for body and rear wheel security
Angled up at 20° to remove ground clearance problems
Changes the stock Axial AX80041 Rock Bed rails
Appears like full-size 2" diameter tubes
1/4" (6mm) up change

CONSISTS OF:
Rock Slider Set with Guidelines

You will enjoy this product if you have the product earlier discussed.



The SW0231MG is a budget friendly water resistant digital servo with fantastic torque for lots of applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It combines leading edge innovation with super high 12-bit (4096) resolution and metal equipments for your greater precision when evading puddles. This is a terrific upgrade if your planning to drive your RC car in any condition...rain, sleet, or snow.

Features:

• Combines leading edge
  innovation with super high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Very strong metal equipments make sure long-life and durability.
• Our servos are absolutely green ? from products to production, these servos are environmentally friendly.
• Ideal for RC vehicles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

This item is often acquired with the above stated item.

Superlift Superide 100mm Scale Shock Absorbers

This is a set of 1/10 scale Superlift Off-Road 100mm Racing Shocks from RC4WD.

FEATURES:
CNC machined billet aluminum construction with white painted finish
Internal spring design

CONSISTS OF:
2 Superlift Off-Road 100mm Racing Shocks

REQUIRES:
Shock Boots
    Black Rubber Boot Z-S0891, RC4C1891
    Red Rubber Boot Z-S0948
    Yellow Rubber Boot Z-S0962
    Blue Rubber Boot Z-S0961

SPECIFICATIONS:
Hole to Hole (Compressed): 2.85" (72.5mm)
Hole to Hole (Uncompressed): 3.93" (100mm)
General Length: 4.29" (109mm)
Travel Length: 1.22" (31mm)
Shock Body: 0.39" (10mm)
Shaft Size: 0.13" (3.4mm)
Stickers Specifications (Length): 1.26" (32mm)
Stickers Specifications (Width): 0.33" (8.6mm)
Weight: 0.49oz (14g)

COMMENTS:
Superlift is a signed up trademark of the Superlift Suspension
    Systems. The Superlift logo design is home of Superlift Suspension
    Systems.