RPM Re Revo True Track A-Arm Conversion Black

This is the RPM True-Track Back A-Arm Conversion in Black
for all versions of the Traxxas Revo.

FEATURES:
Eliminates stock rear toe links, locking in the rear toe angle at
    1.5° per side for a total rear toe-in angle of 3°
Eliminates all rear bump steer for better rear end tracking
    regardless of surface
Changes lower pivot ball with a 4mm size hinge pin for continuous
    rear toe angle
Maintains stock upper pivot ball to permit camber changes
Weighs a total of 1-1/8oz (32g) less than stock elements

CONSISTS OF:
Two each Upper and Lower Back A-Arms
Two Axle Carriers
Two 4mm Hinge Pins
4 E-Clips
Two 3x16mm Shock Mount Screws
Two Aluminum Pivot Ball Set Screws
Two Delrin Pivot Ball Bushing Cups
Two 6x15mm Sealed Outer Bearings
Two 12x21mm Sealed Inner Bearings
Direction sheet

NEEDS:
Getting rid of stock rear elements

REMARKS:
This True-Track system works with the following RPM
    elements;
    RPMC8237 Front Black A-Arms
    RPMC8238 Front Blue A-Arms
    RPMC8222 Black Front Upper and Lower Left A-Arms
    RPMC8585 RPM Axle Carriers/Steering Blocks

Not suitable with the Traxxas #5356 Long Travel Rocker Set.