RPM Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Durable nylon enhanced plastic construction
Utilizes all stock hardware (for mounting shocks and so on)

CONSISTS OF:
One rear shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm

Get this item to improve the one you are reading around.

Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Bandit & Nitro Stampede.

FEATURES:
Plastic construction
Black in color

CONSISTS OF:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Bandit
    and Nitro Stampede

REQUIRES:
Setup on the vehicle

SPECIFICATIONS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Thickness: .27" (7mm)

Want another terrific item to enhance the above mentioned item?

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
Two Front bearing (hub) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

This item compliments the main item here.



This is the ST Racing Hardened Polished Steel Lock-nut Design Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins revoking the A-arms? If you have actually
been running your Traxxas vehicle long enough, you probably have
already experienced this issue. ST Racing Principles Heat Treated
Polished Steel Lock-Nut Design Hinge-Pin Kit will fix this issue
when and for all. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat treated for increase in sturdiness, then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts

Get this item to improve the one you are reading around.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Automobile and Safeguards the Chassis.

FEATURES:
Resilient Plastic Building and construction
Black in Color

CONSISTS OF:
One Bumper
One Team RPM Decal

REQUIRES:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

The below item likewise sets truly well with the item being talked about.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Principles Polished Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel construction

CONSISTS OF:
Left and Right King Pins for front suspension

This is a amazing addition to the item presently being talked about.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Back Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
Two rear bearing (hub) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at widest point: 15.4mm (0.61")