RPM Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2 rear bearing (center) carriers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at largest point: 15.4mm (0.61")

You will certainly love this product if you have the product earlier mentioned.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2 Front bearing (center) carriers
2 RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Numerous others have actually purchased this thing along with the thing that you are currently reviewing.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is exactly what the
guiding knuckles connect to.

FEATURES:
Nylon building and construction, black in color
Stamped right and left to guarantee appropriate installation

INCLUDES:
2 RPM 30° Front Caster Blocks

REQUIRES:
Assembly between A-arms and guiding knuckles

Right here is a terrific thing that several others have actually bought at the exact same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Right here is an additional thing that compliments the thing being gone over.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a set of ST Racing Principles Polished Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat dealt with and polished steel building and construction

INCLUDES:
Left and Right King Pins for front suspension

Right here is an additional thing that compliments the thing being gone over.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, black in color
Direct fit hop-up needs no model adjustment for installation

INCLUDES:
2 Front A-Arms

REQUIRES:
Setup following the model handbook

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at largest

REMARKS:
For the blue variation of this part order RPMC8246

This thing compliments the above gone over thing.

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Strong Rear A-Arms for the
2WD Traxxas Slash Short Course Racing Truck.

FEATURES:
Nylon building and construction
Black in color
Very durable

INCLUDES:
2 Strong Rear A-Arms

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

REMARKS:
Likewise offered in Blue RPMC8472

Numerous others have actually purchased this thing along with the thing that you are currently reviewing.

Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Bandit & Nitro Stampede.

FEATURES:
Plastic building and construction
Black in color

INCLUDES:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Bandit
    and Nitro Stampede

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Density: .27" (7mm)