RPM Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2 rear bearing (hub) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at best point: 15.4mm (0.61")

You will certainly enjoy this item if you have the item earlier mentioned.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2 Front bearing (hub) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Numerous others have acquired this thing in addition to the thing that you are presently reading about.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is what the
steering knuckles connect to.

FEATURES:
Nylon building and construction, black in color
Stamped right and delegated insure appropriate installation

INCLUDES:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and steering knuckles

Below is a excellent thing that lots of others have bought at the very same time.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Below is another thing that praises the thing being reviewed.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a set of ST Racing Concepts Sleek Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel building and construction

INCLUDES:
Left and Right King Pins for front suspension

Below is another thing that praises the thing being reviewed.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, black in color
Direct fit hop-up needs no design adjustment for installation

INCLUDES:
2 Front A-Arms

NEEDS:
Installation following the design manual

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at best

COMMENTS:
For the blue variation of this part order RPMC8246

This thing praises the above reviewed thing.

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Strong Rear A-Arms for the
2WD Traxxas Slash Brief Course Racing Truck.

FEATURES:
Nylon building and construction
Black in color
Extremely resilient

INCLUDES:
2 Strong Rear A-Arms

NEEDS:
Installation on the car

SPECS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

COMMENTS:
Also available in Blue RPMC8472

Numerous others have acquired this thing in addition to the thing that you are presently reading about.

Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Outlaw & Nitro Stampede.

FEATURES:
Plastic building and construction
Black in color

INCLUDES:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Outlaw
    and Nitro Stampede

NEEDS:
Installation on the car

SPECS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Density: .27" (7mm)