RPM Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Bandit & Nitro Stampede.

FEATURES:
Plastic building and construction
Black in color

INCLUDES:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Bandit
    and Nitro Stampede

NEEDS:
Installation on the vehicle

SPECS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Density: .27" (7mm)

This is a superb addition to the product currently being talked about.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2 Front bearing (center) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if required use (2) DTXC1547.

This is a superb addition to the product currently being talked about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Sturdy nylon strengthened plastic building and construction
Uses all stock hardware (for installing shocks and so on)

INCLUDES:
One rear shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm

You will certainly enjoy this product if you have the product previously mentioned.



This is the ST Racing Hardened Sleek Steel Lock-nut Style Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins backing out of the A-arms? If you have actually
been running your Traxxas vehicle enough time, you more than likely have
currently experienced this problem. ST Racing Principles Heat Treated
Sleek Steel Lock-Nut Style Hinge-Pin Kit will fix this problem
at last. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat treated for increase in toughness, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
2 52mm hinge pins
2 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

Right here is a excellent product that many others have purchased the same time.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Principles Sleek Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat treated and polished steel building and construction

INCLUDES:
Left and Right King Pins for front suspension

This product praises the main item right here.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2 rear bearing (center) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if required use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at best point: 15.4mm (0.61")

Want another excellent product to enhance the above stated product?

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, black in color
Direct fit hop-up needs no model modification for installation

INCLUDES:
2 Front A-Arms

NEEDS:
Installation following the model handbook

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at best

COMMENTS:
For the blue version of this part order RPMC8246