RPM Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

NEEDS:
Installation at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

COMMENTS:
Likewise readily available in Blue (RPMC0705)

Right here is a excellent thing that lots of others have purchased the same time.

Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum construction, covered
Anodized black with white springs
Completely put together

CONSISTS OF:
Four completely put together shocks with white springs
Mounting hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and putting together onto the model

This thing is often acquired with the above pointed out thing.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on vehicle

This thing is often acquired with the above pointed out thing.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel construction

CONSISTS OF:
Front driveshaft assembly
Screw pin

NEEDS:
Installation on vehicle

This thing praises the above discussed thing.

3 X 15Mm Button Hex Screw (6)

This is a bundle of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Utilized on the Traxxas Revo monster truck, can also be utilized in any
    application where a 3x15mm button head screw is required

CONSISTS OF:
6 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

You will certainly enjoy this item if you have the item just above stated.

Suspension Pin Set, Complete Frt & Rr Includes Frt & Rr Swa

This is the Suspension Pin Set for the Traxxas Slash 4X4.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel construction
Silver in color

CONSISTS OF:
Four 51.5mm pins
Four 30mm pins

NEEDS:
Installation on the Slash 4x4

Get this thing to improve the one you are reading about.

Front Or Rear A-Arms For Traxxas Slash 4X4 Or Rustler 4X4, Blue

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Blue in color
Plastic constrution

CONSISTS OF:
(2) Front/Rear A-Arms

NEEDS:
Installation on front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

COMMENTS:
Likewise readily available in Black (RPMC0702)

This thing praises the main item right here.



Racers Edge 7.4V 25C 5000 Race Battery hardwired W/TRX HC Plug. Racers Edge battery is lighter than conventional Ni-Cd or Ni-Mh batteries while providing enhanced efficiency and run times. It utilizes the exact same balancing connection as Align or Electrifly chargers. Be sure to use a voltage cut off if your speed control does not come equipped with one. ONLY USE A BATTERY CHARGER SPECIFICALLY FOR Li-Poly cells!!!

Regularly acquired with the thing that you are currently reviewing.

Front Bulkhead For Slash 4X4 Lcg And Rustler 4X4, Black

This is the optional RPM Front Bulkhead for the Traxxas Slash LGC 4x4.
**Suitable with the LGC chassis only**
**will not work with the basic chassis version of the Slash 4x4.**

FUNCTIONS:
Two-piece design allows front end of vehicle to be eliminated without
    having to eliminate the bellcranks
Side dirt guards blend with the chassis and aid protect the
    guiding servo and bellcrank location from dirt
Constructed of engineering grade nylons, black in color

CONSISTS OF:
Two-Piece Front Bulkhead with Mounting Hardware and Instruction Sheet