RPM Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two Front bearing (hub) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Frequently bought with the thing that you are presently checking out.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks mount to the front A-arms and is what the
steering knuckles connect to.

FEATURES:
Nylon building and construction, black in color
Stamped right and left to insure appropriate setup

INCLUDES:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and steering knuckles

Right here is a terrific thing that lots of others have bought at the very same time.

Heat-Treated, Carbon Steel Front King-Pins, For Traxxas Slash /

This is a pair of ST Racing Concepts Sleek Front King Pins
for the 1/10 scale 2WD Traxxas Slash.

FEATURES:
CNC machined, heat dealt with and polished steel building and construction

INCLUDES:
Left and Right King Pins for front suspension

This thing compliments the above talked about thing.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two rear bearing (hub) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at widest point: 15.4mm (0.61")

This thing compliments the main item here.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing compliments the main item here.

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Sturdy Rear A-Arms for the
2WD Traxxas Slash Brief Course Racing Truck.

FEATURES:
Nylon building and construction
Black in color
Very durable

INCLUDES:
Two Heavy Duty Rear A-Arms

NEEDS:
Setup on the automobile

SPECS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

COMMENTS:
Also readily available in Blue RPMC8472

This thing compliments the above talked about thing.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made of stainless steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Also called the vertical kingpin

INCLUDES:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

The below thing also pairs actually well with the thing being talked about.

Front Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the optional RPM Front Shock Tower for the
Traxxas E-Stampede, E- Rustler, Outlaw & Nitro Stampede.

FEATURES:
Plastic building and construction
Black in color

INCLUDES:
One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Outlaw
    and Nitro Stampede

NEEDS:
Setup on the automobile

SPECS:
Width: 3.26" (83mm)
Height: 2.91" (74mm)
Thickness: .27" (7mm)