RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building, blue in color
Direct fit hop-up needs no design adjustment for setup

CONSISTS OF:
2 Front A-Arms

NEEDS:
Setup following the design manual

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowest 1.52" (38.5mm) at largest

COMMENTS:
For the black variation of this part order RPMC8245

This is a wonderful enhancement to the item currently being gone over.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Blue

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These mount to the bulkhead and the hubs mount to it.

FEATURES:
Heavy Duty Nylon Construction
Blue in Color
Pre-Drilled Shock Mounting Positions
For the Back of the Electric Rustler and Electric Stampede

CONSISTS OF:
2 Back Blue A-Arms
One RPM Decal Sheet w/ 2 RPM Logos

NEEDS:
Assembly onto Vehicle.

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Center: 1.11" (28.25mm)
Density: .31" (7.8mm)

This item praises the main item below.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building

CONSISTS OF:
2 Front bearing (center) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Frequently purchased with the item that you are currently checking out.



This is the ST Racing Solidified Refined Steel Lock-nut Style Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Fed up with the stock hinge-pins backing out of the A-arms? If you've
been running your Traxxas automobile long enough, you more than likely have
already experienced this problem. ST Racing Ideas Heat Treated
Refined Steel Lock-Nut Style Hinge-Pin Kit will fix this problem
once and for all. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat treated for increase in sturdiness, then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

Frequently purchased with the item that you are currently checking out.

Skid Plates, Front & Rear (Blue)

These are optional Front and Rear Skid Plates in Blue for the
Traxxas Electric Stampede.

FEATURES:
Constructed of plastic, blue in color
Changes stock black skid plates

CONSISTS OF:
Front and Back Blue Skid Plates

This item praises the above gone over item.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, blue in color
Installs at rear of chassis to avoid automobile from flipping over
    during wheelies

CONSISTS OF:
Put together optional Wheelie Bar with installing guidelines and
    hardware

NEEDS:
Securing to rear of chassis