RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon construction, blue in color
Direct fit hop-up requires no design adjustment for setup

CONSISTS OF:
2|2} Front A-Arms

REQUIRES:
Installation following the design manual

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowest 1.52" (38.5mm) at largest

COMMENTS:
For the black variation of this part order RPMC8245

This is a superb addition to the item presently being talked about.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Blue

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These mount to the bulkhead and the hubs mount to it.

FEATURES:
Strong Nylon Building and construction
Blue in Color
Pre-Drilled Shock Mounting Positions
For the Back of the Electric Rustler and Electric Stampede

CONSISTS OF:
2|2} Back Blue A-Arms
One RPM Decal Sheet w/ 2|2} RPM Logos

REQUIRES:
Assembly onto Vehicle.

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Center: 1.11" (28.25mm)
Thickness: .31" (7.8mm)

This item praises the main item right here.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles suit these bearing carriers.

FEATURES:
Black nylon construction

CONSISTS OF:
2|2} Front bearing (center) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

Often purchased with the item that you are presently reviewing.



This is the ST Racing Hardened Polished Steel Lock-nut Design Hinge-pin Set
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins backing out of the A-arms? If you've
been running your Traxxas automobile long enough, you most likely have
already experienced this problem. ST Racing Principles Heat Treated
Polished Steel Lock-Nut Design Hinge-Pin Set will resolve this problem
at last. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat dealt with for increase in sturdiness, then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts

Often purchased with the item that you are presently reviewing.

Skid Plates, Front & Rear (Blue)

These are optional Front and Rear Skid Plates in Blue for the
Traxxas Electric Stampede.

FEATURES:
Constructed of plastic, blue in color
Replaces stock black skid plates

CONSISTS OF:
Front and Back Blue Skid Plates

This item praises the above talked about item.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, blue in color
Installs at rear of chassis to avoid automobile from turning over
    throughout wheelies

CONSISTS OF:
Assembled optional Wheelie Bar with mounting directions and
    hardware

REQUIRES:
Attaching to rear of chassis