RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of Strong Front-A Arms in Green
for the Traxxas Electric Rustler, Stampede, Bandit, Slash and Nitro Slash.

FEATURES:
Composite nylon building and construction, green in color
Nearly 25% lighter than stock versions
Increased clearance locations in the outer portion enables increased
    droop travel when utilized with RPM #80372 and #80382 oversized
    bearing carriers

CONSISTS OF:
Two Strong Front-A Arms in Green

This thing praises the above gone over thing.

Rear A-Arms, For Traxxas Elecric Stampede 2Wd And Rustler

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These mount to the bulkhead and the centers mount to it.

FEATURES:
Strong Nylon Building and construction
Green in Color
Pre-Drilled Shock Installing Positions
For the Rear of the Electric Rustler and Electric Stampede

CONSISTS OF:
Two Rear Green A-Arms
One RPM Decal Sheet w/ Two RPM Logos

NEEDS:
Assembly onto Car

SPECIFICATIONS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Hub: 1.11" (28.25mm)
Thickness: .31" (7.8mm)

Several others have actually acquired this thing in addition to the thing that you are presently reading about.

Rear A-Arms, For Traxxas Slash 2Wd, Green

This is a set of optional RPM Rear A-Arms
for the 1/10 scale Traxxas Slash 2WD.

FEATURES:
Composite plastic building and construction, green in color

CONSISTS OF:
Left and Right Rear A-Arm

Several others have actually acquired this thing in addition to the thing that you are presently reading about.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is exactly what the
steering knuckles attach to.

FEATURES:
Nylon building and construction, black in color
Stamped right and delegated guarantee correct installation

CONSISTS OF:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and steering knuckles

Frequently acquired with the thing that you are presently reading about.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Versatile plastic building and construction, green in color

CONSISTS OF:
RPM Wide Front Bumper in Green

SPECIFICATIONS:
Length: 2.7" (70mm) determined at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

Right here is a fantastic thing that numerous others have actually bought at the exact same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Front bearing (center) carriers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

This thing praises the above gone over thing.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a set of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FEATURES:
Harddened steel building and construction

CONSISTS OF:
Two Rear Driveshafts

This thing praises the main item below.

Spur Gear (83T) 48P

This is a 48P, 83T Spur Gear for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Designed for designs with a slipper clutch.
Black plastic building and construction

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 83

COMMENTS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).