RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of Heavy Duty Front-A Arms in Green
for the Traxxas Electric Rustler, Stampede, Bandit, Slash and Nitro Slash.

FEATURES:
Composite nylon building, green in color
Nearly 25% lighter than stock variations
Increased clearance areas in the outer portion enables increased
    droop travel when used with RPM #80372 and #80382 extra-large
    bearing providers

CONSISTS OF:
Two Heavy Duty Front-A Arms in Green

This thing praises the above talked about thing.

Rear A-Arms, For Traxxas Elecric Stampede 2Wd And Rustler

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These install to the bulkhead and the centers install to it.

FEATURES:
Heavy Duty Nylon Building
Green in Color
Pre-Drilled Shock Mounting Positions
For the Rear of the Electric Rustler and Electric Stampede

CONSISTS OF:
Two Rear Green A-Arms
One RPM Decal Sheet w/ Two RPM Brandings

REQUIRES:
Assembly onto Car

SPECIFICATIONS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Center: 1.11" (28.25mm)
Thickness: .31" (7.8mm)

Lots of others have bought this thing together with the thing that you are currently reading about.

Rear A-Arms, For Traxxas Slash 2Wd, Green

This is a set of optional RPM Rear A-Arms
for the 1/10 scale Traxxas Slash 2WD.

FUNCTIONS:
Composite plastic building, green in color

CONSISTS OF:
Left and Right Rear A-Arm

Lots of others have bought this thing together with the thing that you are currently reading about.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks install to the front A-arms and is exactly what the
guiding knuckles attach to.

FEATURES:
Nylon building, black in color
Stamped right and delegated guarantee right setup

CONSISTS OF:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly in between A-arms and guiding knuckles

Regularly bought with the thing that you are currently reading about.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Flexible plastic building, green in color

CONSISTS OF:
RPM Wide Front Bumper in Green

SPECIFICATIONS:
Length: 2.7" (70mm) measured at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

Right here is a great thing that numerous others have purchased the very same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building

CONSISTS OF:
Two Front bearing (hub) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

This thing praises the above talked about thing.

Driveshafts, Rear, Steel-Spline Constant-Velocity (Complete Asse

This is a set of optional Rear Driveshafts
for the 1/10 scale Traxxas Slash 4x4.

FUNCTIONS:
Harddened steel building

CONSISTS OF:
Two Rear Driveshafts

This thing praises the main item right here.

Spur Gear (83T) 48P

This is a 48P, 83T Stimulate Gear for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Developed for designs with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 83

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).