RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, black in color
Direct fit hop-up needs no design adjustment for setup

INCLUDES:
2|2} Front A-Arms

NEEDS:
Installation following the design handbook

SPECS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at widest

REMARKS:
For the blue version of this part order RPMC8246

Want another great product to compliment the above mentioned product?

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Strong Rear A-Arms for the
2WD Traxxas Slash Brief Course Racing Truck.

FEATURES:
Nylon building and construction
Black in color
Very long lasting

INCLUDES:
2|2} Strong Rear A-Arms

NEEDS:
Installation on the automobile

SPECS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

REMARKS:
Also readily available in Blue RPMC8472

This product is frequently acquired with the above mentioned product.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
2|2} Front bearing (hub) providers
2|2} RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

Want another great product to compliment the above mentioned product?



This is the ST Racing Solidified Sleek Steel Lock-nut Design Hinge-pin Set
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins revoking the A-arms? If you've
been running your Traxxas automobile enough time, you most likely have
already experienced this problem. ST Racing Concepts Heat Treated
Sleek Steel Lock-Nut Design Hinge-Pin Set will resolve this problem
once and for all. CNC Machined from high-quality 12.9 grade carbon
steel, that is then heat dealt with for boost in sturdiness, then
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts

This product praises the main item right here.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two rear bearing (hub) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at widest point: 15.4mm (0.61")

This product praises the main item right here.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Black

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These mount to the bulkhead and the hubs mount to it.

FEATURES:
Strong Nylon Building
Black in Color
Pre-Drilled Shock Mounting Positions
For the Rear of the Electric Rustler and Electric Stampede

INCLUDES:
Two Rear Black A-Arms
One RPM Decal Sheet w/ Two RPM Logos

NEEDS:
Assembly onto Vehicle.

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Center: 1.11" (28.25mm)
Thickness: .31" (7.8mm)