RPM Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon construction, black in color
Direct fit hop-up requires no design adjustment for setup

INCLUDES:
2|2} Front A-Arms

REQUIRES:
Setup following the design manual

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at widest

REMARKS:
For the blue variation of this part order RPMC8246

Want an additional fantastic thing to enhance the above mentioned thing?

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Strong Rear A-Arms for the
2WD Traxxas Slash Brief Course Racing Truck.

FEATURES:
Nylon construction
Black in color
Very resilient

INCLUDES:
2|2} Strong Rear A-Arms

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

REMARKS:
Also readily available in Blue RPMC8472

This thing is regularly gotten with the above mentioned thing.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
2|2} Front bearing (center) providers
2|2} RPM decals

REQUIRES:
(4) 5x11mm bearings, if required use (2) DTXC1547.

Want an additional fantastic thing to enhance the above mentioned thing?



This is the ST Racing Solidified Polished Steel Lock-nut Design Hinge-pin Set
For the Electric Traxxas Slash, Rustler, Stampede, and Outlaw 1/10 trucks
and Nitro Slash.

FEATURES:
Tired of the stock hinge-pins revoking the A-arms? If you've
been running your Traxxas automobile enough time, you most likely have
currently experienced this problem. ST Racing Concepts Heat Treated
Polished Steel Lock-Nut Design Hinge-Pin Set will solve this problem
once and for all. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat treated for increase in toughness, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin avoids the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Offered as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
Two 52mm hinge pins
Two 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
Eight lock-nuts

This thing compliments the main item here.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Rear Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
Two rear bearing (center) providers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if required use (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at widest point: 15.4mm (0.61")

This thing compliments the main item here.

Rear A-Arms, For Traxxas Elec. Stampede 2Wd, & Rustler, Black

These are the optional Rear A-Arms (Supension Arms) for the Traxxas
Electric Rustler and Electric Stampede.
These install to the bulkhead and the hubs install to it.

FEATURES:
Strong Nylon Construction
Black in Color
Pre-Drilled Shock Mounting Positions
For the Rear of the Electric Rustler and Electric Stampede

INCLUDES:
Two Rear Black A-Arms
One RPM Decal Sheet w/ Two RPM Brandings

REQUIRES:
Assembly onto Vehicle.

SPECS:
Length: 4.04" (102.5mm)
Width at Bulkhead: 1.80" (45.5mm)
Width at Center: 1.11" (28.25mm)
Density: .31" (7.8mm)