RPM Esc Cage For The Castle Mamba X 8S

Our ESC Cage for the Castle Mamba X ESC supplies a solid, positive install to keep your brand-new and valuable Castle Mamba-X 8S ESC in place on your ARRMA Kraton 8S or Castaway 8S, even under the most severe circumstances. It also allows the ESC to be kept up or without a fan. Our ESC Cage frames the ESC body just, leaving the fan totally free for easy elimination for wet running. Moreover, we left air channels along the sides of the ESC to allow air motion, assisting to keep the ESC cool.

The 4 base plate mounting screws can be accessed without eliminating the top cage, making this one of the simplest ESC Cages we manufacture to remove and install. We consist of a different, enclosed on / off switch install that bolts straight to our cage in one of 2 orientations for severe adaptability. Considering that the switch connects to the cage, no additional time is needed to eliminate it throughout maintenance or if you decide to swap the ESC between vehicles.

Each RPM ESC Cage is molded in black and manufactured from our ridiculously difficult blend of engineering grade nylons. They're backed by our minimal lifetime warranty versus damage also. Do not trust your financial investment to double-sided tape or zip ties.

Tech Notes: The RPM ESC Cage for the Mamba X 8S ESC deals with Castle ESCs from the following

Castle part numbers #010-0165-00 & #010-0165-01. Our ESC Cage has been checked and guaranteed to fit the ARRMA Kraton 8S and Castaway 8S running the stock ARRMA Receiver Box Lid #AR320553.

Product Created: 12/10/2020