RPM Black Esc Cage For Castle Sidewinder 3 & Sidewinder Sct Escs

This is the RPM ESC Cage for Castle Sidewinder 3
and Sidewinder SCT Electronic Speed Controls.

FEATURES:
Constructed of engineering grade nylon, black in color
Fits the following Castle Creations ESCs;
    010-0115-00, 010-0115-01, 010-0115-02, 010-0115-03, 010-0115-04
    010-0123-00
Allows ESC to be run with or without a fan
Fastens to chassis with two screws, whole assembly can be transfered
    from one automobile to the next in about a minute
Different switch install bolts to cage, or might be mounted anywhere by
    two 2mm holes
Fits the following Traxxas vehicles;
    Slash 2WD
    Slash 2wd LCG
    Slash 4×4,
    Slash 4×4 LCG
    Stampede 4x4
    Rally
Fits the following Traxxas vehicles when the Traxxas #3725 Mounting
    Plate is used;
    Rustler XL-5
    Stampede XL-5
    Bandit XL-5

INCLUDES:
Unassembled ESC Cage with Hardware and Direction Sheet
Different On/Off Switch Mount

This is a great addition to the item presently being discussed.

Hc Connector M (2) Available Only From

These are the Male Traxxas Connectors Plugs just (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube required)
Wide surface area, gold-plated terminals
Reverse polarity defense makes it difficult to link backwards
Textured surface for easy gripping
Suitable with high-current 12-gauge wire
Protected favorable locking spring packed terminals for constant
    contact
Several locking barbs keep terminals secure

INCLUDES:
Two black male plastic connectors
Two sets of gold metal pins
Direction sheet

NEEDS:
Soldering wires to the metal pins

Regularly purchased with the item that you are presently reading about.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for usage in much heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB shows capability through Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for usage in nearly every environment (not meant for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces numerous stock brushed motors
Four magnet, 4 pole rotor for higher torque
1.4" size slotted stator
Removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Switch, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's choice

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)