RPM Axle Carriers/Oversized Bearings Blk Revo

This is a set of optional RPM Axle Carriers/Steering Blocks
for the Traxxas Revo.
These will also work on the T/E Maxx 2.5R and 3.3 versions.

FEATURES:
Constructed of molded composite material, black in color
Wall thickness around the pillow-balls has actually been increased by 40%
    getting rid of split walls
Over 20% more material supports the pillow-balls, avoiding them
    from pulling through
Revamped enhancing rib supporting tie rod install
Revamped boot lock tabs for simpler removal of the silicone boots
Press-fit bearings in the provider for minimized axle movement
Two-piece pillow-ball set screws utilize aluminum and Delrin for the
    ultimate in holding power under extreme scenarios

CONSISTS OF:
2 Axle Carriers/Steering Blocks
2 12x21x5mm Inner Bearings
2 6x15x5mm Outer Bearings
4 Aluminum Set Screws
4 Delrin Bushing Caps
Guideline Sheet

REQUIRES:
Installing on axles, no modifications needed

REMARKS:
Replacement Bearing Set, RPMC8570
Replacement Pillow-Ball Set Screws, RPMC0800

Do not utilize the Traxxas #5356 Long Travel Rocker Arm Set with these
    Axle Carriers. Doing so will void the RPM warranty.

The listed below item additionally pairs actually well with the item being reviewed.

Half Shaft Set, Long (Plastic

These are the Long Half Shafts for use on the
Traxxas Top Truck RTR

FEATURES:
Plastic construction
Black in color

CONSISTS OF:
2 Long Half Shaft Sets, internal splined half shafts and external
    half shafts with glued boot

REQUIRES:
Installation on the car

SPECIFICATIONS:
Length: 130mm (5")
Size: 17.3mm (0.68")