RPM Adjustable Front Body Mounts & Post, For Traxxas Slash/Rustler/N

This is the RPM Front Body Mount for the Slash, Stampede or Nitro Stampede.

FEATURES:
Black plastic building and construction
Heavy-duty design

CONSISTS OF:
One front body install set, four 3x10mm flathead screws, guidelines
and decals

NEEDS:
Installation following the included guidelines

Here is a fantastic product that several others have actually bought at the exact same time.

Adjustable Rear Body Mounts & Post, For Traxxas Slash/Rustler/Ni

This is the RPM Back Body Mount for the Slash, Stampede or Nitro Stampede.

FEATURES:
Black plastic building and construction
Heavy-duty design

CONSISTS OF:
One back body install set, four 3x10mm flathead screws, guidelines
and decals

NEEDS:
Installation following the included guidelines

You will certainly love this thing if you have the thing just above pointed out.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a set of optional Front A-Arms for the Traxxas
Electric Stampede and Rustler.

FEATURES:
Composite nylon building and construction, black in color
Direct fit hop-up needs no design adjustment for installation

CONSISTS OF:
Two Front A-Arms

NEEDS:
Installation following the design manual

SPECIFICATIONS:
Length: 3.31" (84mm)
Width: .88" (22.5) at narrowist 1.52" (38.5mm) at best

COMMENTS:
For the blue version of this part order RPMC8246

This product compliments the above gone over product.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two Front bearing (center) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

This product compliments the above gone over product.

Rear Bearing Carriers, For Traxxas Slash 2Wd, E-Rustler, E-Stamp

These are Optional Back Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit.
The rear axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
Two rear bearing (center) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if required usage (2) DTXC1547.

SPECS:
Height: 40mm (1.58")
Width at best point: 15.4mm (0.61")

This is a amazing addition to the product currently being gone over.

Rear A-Arms, For Traxxas Slash, Black

    These are the RPM Strong Back A-Arms for the
2WD Traxxas Slash Short Course Racing Truck.

FEATURES:
Nylon building and construction
Black in color
Extremely durable

CONSISTS OF:
Two Strong Back A-Arms

NEEDS:
Installation on the car

SPECIFICATIONS:
Length: 95mm (3.7")
Width: 47mm (1.85")
Height: 10.5mm (0.41")

COMMENTS:
Likewise readily available in Blue RPMC8472

Here is an additional product that compliments the product being gone over.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is exactly what the
steering knuckles attach to.

FEATURES:
Nylon building and construction, black in color
Stamped right and left to guarantee proper installation

CONSISTS OF:
Two RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and steering knuckles

Want an additional fantastic product to compliment the above pointed out product?

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Back Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Sturdy nylon enhanced plastic building and construction
Uses all stock hardware (for mounting shocks etc.)

CONSISTS OF:
One back shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm