ROC Hobby ROCHOBBY Waco Red PNP

The RocHobby Waco actually does fly like a dream. While there is lots of power for loops, rolls, and inverted flight, the RocHobby Waco is extremely gentle at half throttle. We had no concerns using short turf or pavement as our runway. Not just does the RocHobby Waco fly well however it is definitely remarkable to look at. This is among the best looking airplanes we have actually seen in a long period of time. The traditional red and white coloring looks terrific in the sky and on the ground. FMS did a great job with this RC aircraft. A few of the most outstanding details are the LED navigation lights, the comprehensive cowl, and the rigging. We believe this plane needs to have a location in any wall mount. See the video below for a demonstration.

Key Features
Scale details including two hand painted pilots, radial engine and one piece propeller

Aesthetically attractive paint scheme provides the Waco a stylish look and makes the plane simple to see in the sky

Made from durable EPO foam

LED Navigation lights

Steerable tail equipment for simple taxi, remove, and landings

Four ailerons for extreme maneuverability

Powerful brushless motor, ESC, and servos are all pre-installed

maker	RocHobby
Wingspan	1030mm / 40.6in
Overall Length	810mm / 31.9in
Flying Weight	Around 1000g
Motor Size	Brushless 3536-850KV
ESC	40A Brushless ESC
Servo	6*9g servos
Radio	4 Channel
CG (center of mass)	85mm(From Leading Edge)
Prop Size	11*7 2 blade Propeller
Suggested Battery	11.1V 2200mAh 25C 3 cell LiPo
Aileron	Yes
Elevator	Yes
Rudder	Yes
Flaps	No
Withdraws	No
Approximate. Flying Period	5 minutes
Minimum Age Suggestion	14+
Experience Level	Beginner
Recommended Environment	Outdoor
Assembly Time	45 minutes
Is Assembly Required	Yes
Material	Durable EPO
Package Choices	PNP
Requires	PNP Requires Radio System, Battery and Charger