RJX Servo line Color Black (1m)

Seeking to tidy up the appearance of your helicopter, plane of RC vehicle & secure your servo lines from chaffing? Servo Line Covering is an easy way to secure your servo wires, adding a tidy, visual want to your RC maker, and can be set up in a matter of minutes. Select from our amazing line of different colors to include a whole makeover to your RC machine!

Included In Bundle:

(1) 1M (3.28 ft.) Servo Line Covering

This item compliments the above discussed item.

Servo line Color Green (1m)

Seeking to tidy up the appearance of your helicopter, plane of RC vehicle & secure your servo lines from chaffing? Servo Line Covering is an easy way to secure your servo wires, adding a tidy, visual want to your RC maker, and can be set up in a matter of minutes. Select from our amazing line of different colors to include a whole makeover to your RC machine!

Included In Bundle:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Set up Servo Line Covering?

Simply remove your servo(s) from the receiver, determine the length of covering you will need for your servo wire(s), and open one end of the covering and insert the servo terminal inside. It works best to "inch worm" your servo wire by holding the terminal inside the servo covering, and gradually inching the covering over the terminal, and pressing the terminal forward.

Once your servo wire is covered, cut off a proper sized piece of the consisted of heat diminish, and slide it over the covering till it is flush with the servo itself. Heat the diminish wrap with a soldering iron or heat gun to diminish it down around the covering, hence offering you a flush, tight fit over the previously frayed servo covering. Do the exact same with the end of your servo wire, taking care to leave the terminal bare so it can easily plug into your receiver. Likewise, make certain to keep in mind of the servo wire polarity if you cover the complete wire - this will make sure that you will understand what direction to plug your servo terminal into your receiver.

This item compliments the above discussed item.

Servo line Color Black and Red

Seeking to tidy up the appearance of your helicopter, plane of RC vehicle & secure your servo lines from chaffing? Servo Line Covering is an easy way to secure your servo wires, adding a tidy, visual want to your RC maker, and can be set up in a matter of minutes. Select from our amazing line of different colors to include a whole makeover to your RC machine!

Included In Bundle:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Set up Servo Line Covering?

Simply remove your servo(s) from the receiver, determine the length of covering you will need for your servo wire(s), and open one end of the covering and insert the servo terminal inside. It works best to “inch worm” your servo wire by holding the terminal inside the servo covering, and gradually inching the covering over the terminal, and pressing the terminal forward.

Once your servo wire is covered, cut off a proper sized piece of the consisted of heat diminish, and slide it over the covering till it is flush with the servo itself. Heat the diminish wrap with a soldering iron or heat gun to diminish it down around the covering, hence offering you a flush, tight fit over the previously frayed servo covering. Do the exact same with the end of your servo wire, taking care to leave the terminal bare so it can easily plug into your receiver. Likewise, make certain to keep in mind of the servo wire polarity if you cover the complete wire – this will make sure that you will understand what direction to plug your servo terminal into your receiver.