Rage RC Velocity 800 Bl Brushless Deep Vee Offshore Boat, Rtr

The Velocity 800BL is propelled by brushless power that will have you flying across the water at adrenaline-pumping speeds of over 45MPH! Efficiency is delivered by a brushless, water-cooled 1800kV motor, and harnessed by a 60A water-cooled electronic speed control. This overseas spaceship includes a long lasting uni-body ABS hull that shows up pre-painted with a unique matte yellow finish and brilliant, bold graphics that integrate to provide the Velocity a quick, aggressive look. The long lasting zinc/aluminum alloy propeller, anodized aluminum rudder, and stainless running hardware supply a rugged, yet sophisticated look that completes the plan, making the Velocity 800 BL a great looking, high-performance boat that looks as fast on the consisted of display screen stand as it does on the water. Need to high speeds, aggressive turns, or rough seas trigger the boat to flip or capsize, the special self-righting feature immediately turns the boat right-side-up within a few seconds, permitting the chauffeur to bring the Velocity back to dock safely.

The Velocity 800 BL shows up 100% factory-assembled out of the box with a 2-channel, 2.4 GHz radio system featuring fully proportional steering and throttle (forward-only), a 40 Kg/cm (550 oz./in.) water resistant servo, and even the AA batteries to power the transmitter. The only items required for completion are the running batteries (one 4S or 2 2S LiPo loads), and an ideal battery charger.

Key Features:

• Capable of speeds over 45MPH
• Terrific presence thanks to the brilliant yellow hull and dynamic trim scheme
• Special, factory-painted matte finish
• Long lasting uni-body hull, precision-molded from state-of-the-art ABS
• Self-righting feature removes concerns over capsizing
• Effective, water-cooled brushless 3536/1800KV motor
• 60A water-cooled ESC installed
• 40g water resistant guiding servo for accuracy guiding control
• Long lasting prop made from Zinc/Aluminum alloy
• Stainless-steel trim tabs and turning fins
• Anodized aluminum rudder
• Can be operated on 4S or 2 2S LiPo battery packs (not consisted of)
• Consists of 2.4GHz transmitter and 4 AA batteries

Products Needed for Conclusion:

• 2S to 4S LiPo-compatible battery charger
• 2 VNR15008 2S loads, or one 4S battery pack w/XT60 adapters (4000mAh minimum capacity)

Requirements:

• Hull Length: 28 1/2" (725mm)
• Hull Width: 8 1/4" (210mm)
• Overall Length: 32 1/2" (825mm)
• Hull Height: 5 1/2" (140mm)
• Weight w/o Battery: 49.5 oz. (1400g)
• Motor: 3540/2000kV
• Water-Cooled BL Motor
• ESC: 60A Water-Cooled Forward-Only
• Servo: 40 Kg/cm (550 oz./in.) Waterproof Servo
• Transmitter: 2-Channel, 2.4GHz
• Receiver: 2-Channel, 2.4GHz

Velocity Rudder Assembly Manual (Addendum)