Rage RC Velocity 800 Bl Brushless Deep Vee Offshore Boat, Rtr

The Velocity 800BL is propelled by brushless power that will have you flying throughout the water at adrenaline-pumping speeds of over 45MPH! Efficiency is delivered by a brushless, water-cooled 1800kV motor, and harnessed by a 60A water-cooled electronic speed control. This overseas spaceship features a durable uni-body ABS hull that shows up pre-painted with a unique matte yellow surface and brilliant, bold graphics that combine to provide the Velocity a quick, aggressive appearance. The long lasting zinc/aluminum alloy prop, anodized aluminum rudder, and stainless running hardware offer a rugged, yet sophisticated look that finishes the bundle, making the Velocity 800 BL a terrific looking, high-performance boat that looks as quick on the included display stand as it does on the water. Need to high speeds, aggressive turns, or rough seas trigger the boat to turn or capsize, the special self-righting function immediately turns the boat right-side-up within a couple of seconds, enabling the motorist to bring the Velocity back to dock safely.

The Velocity 800 BL shows up 100% factory-assembled out of the box with a 2-channel, 2.4 GHz radio system including fully proportional steering and throttle (forward-only), a 40 Kg/cm (550 oz./in.) waterproof servo, and even the AA batteries to power the transmitter. The only items needed for conclusion are the running batteries (one FOUR or more 2S LiPo packs), and an appropriate battery charger.

Key Features:

• Capable of speeds over 45MPH
• Fantastic visibility thanks to the brilliant yellow hull and lively trim scheme
• Distinct, factory-painted matte surface
• Resilient uni-body hull, precision-molded from state-of-the-art ABS
• Self-righting function removes issues over capsizing
• Powerful, water-cooled brushless 3536/1800KV motor
• 60A water-cooled ESC installed
• 40g waterproof guiding servo for precision guiding control
• Resilient prop made from Zinc/Aluminum alloy
• Stainless steel trim tabs and turning fins
• Anodized aluminum rudder
• Can be run on FOUR or more 2S LiPo battery packs (not included)
• Includes 2.4GHz transmitter and 4 AA batteries

Products Required for Conclusion:

• 2S to FOUR LiPo-compatible battery charger
• Two VNR15008 TWO packs, or one FOUR battery pack w/XT60 adapters (4000mAh minimum capacity)

Specs:

• Hull Length: 28 1/2" (725mm)
• Hull Width: 8 1/4" (210mm)
• Overall Length: 32 1/2" (825mm)
• Hull Height: 5 1/2" (140mm)
• Weight w/o Battery: 49.5 oz. (1400g)
• Motor: 3540/2000kV
• Water-Cooled BL Motor
• ESC: 60A Water-Cooled Forward-Only
• Servo: 40 Kg/cm (550 oz./in.) Waterproof Servo
• Transmitter: 2-Channel, 2.4GHz
• Receiver: 2-Channel, 2.4GHz

Velocity Rudder Assembly Manual (Addendum)