Rage RC Standard Size Metal Gear Analog Servo, Torque/Speed 142/.16 @6V

This is a standard size, ball bearing, metal gear servo by Rage RC.

Specs
Size: 40.8 × 20.1 × 38 mm
Weight: 56 g
Operating Speed: 0.18sec/60degree (4.8V), 0.16sec/60degree (6V)
Stall Torque: 9kg.cm/125.2oz.in(4.8V), 10.2kg.cm/141.9oz.in(6V)
Bearing Type: 2BB
Gear Type: Metal

Want an additional great product to compliment the above pointed out product?

Superlift Superide 100mm Scale Shock Absorbers

This is a pair of 1/10 scale Superlift Off-Road 100mm Racing Shocks from RC4WD.

FEATURES:
CNC machined billet aluminum building with white painted surface
Internal spring design

CONSISTS OF:
2 Superlift Off-Road 100mm Racing Shocks

REQUIRES:
Shock Boots
    Black Rubber Boot Z-S0891, RC4C1891
    Red Rubber Boot Z-S0948
    Yellow Rubber Boot Z-S0962
    Blue Rubber Boot Z-S0961

SPECS:
Hole to Hole (Compressed): 2.85" (72.5mm)
Hole to Hole (Uncompressed): 3.93" (100mm)
Overall Length: 4.29" (109mm)
Travel Length: 1.22" (31mm)
Shock Body: 0.39" (10mm)
Shaft Diameter: 0.13" (3.4mm)
Stickers Requirements (Length): 1.26" (32mm)
Stickers Requirements (Width): 0.33" (8.6mm)
Weight: 0.49oz (14g)

REMARKS:
Superlift is a registered trademark of the Superlift Suspension
    Systems. The Superlift logo is property of Superlift Suspension
    Systems.

Here is a great product that numerous others have purchased the exact same time.



This is the RC4WD Steering Linkage set for the Yota II Axles.

FEATURES:
CNC machined aluminum building
Created to fit the Yota II axles on the RC4WD Path Finder II

CONSISTS OF:
4.1" (103.5mm) Yota II Steering Link Set (Black)
3.9" (100.5mm) Yota II Steering Link Set (Black)
Four M3 x 15mm Set Screws (Z-S0650)
Four M3 Offset Short Plastic Rod Ends (Z-S0401)

SPECS:
Weight: 0.5oz (14g)

Get this product to boost the one you read about.



This is the optional RC4WD Chassis Mounted Steering Package with Panhard Bar
    for the Axial SCX-10 Honcho, Jeep Rubicon and Dingo.

FEATURES:
Converts steering servo from axle mounted to chassis mounted with a
    panhard setup
CNC machined aluminum building
Lightweight at just 2.64oz (75g)

CONSISTS OF:
Receiver Box Mount (Black)
Servo Mount (Black)
Panhard Bar Axle Mount (Black)
64mm Link (Gray)
69mm Link (Gray)
78mm Link (Gray)
5 M3 x 6mm BHCS (Black) (Z-S0651)
Six M3 x 8mm BHCS (Black) (Z-S0652)
2 M3 x 10mm BHCS (Black) (Z-S0653)
Four M3 x 12mm BHCS (Black) (Z-S0654)
2 M3 x 16mm BHCS (Black) (Z-S0656)
2 M3 x 20mm BHCS (Black) (Z-S0895)
5 M3 x 8mm FHCS (Black) (Z-S0649)
2 M3 x 14mm SHCS (Black) (Z-S1055)
2 M3 Short Bent Plastic Rod Ends (Z-S0402)
2 M3 Medium Straight Plastic Rod Ends (Z-S0399)
Six M3 Mini Plastic Rod Ends (Z-S0398)
Eight M3 x 15mm Threaded Rods (Z-S0650)

REMARKS:
Consists of additional link for use on the Axial Dingo set

Here is a great product that numerous others have purchased the exact same time.

22 AWG X15cm Futaba Extension Leads with Hook on female

Information


RJX  22 AWG X15cm  Futaba Extension Leads with Hook on  female