ST Racing Concepts Aluminum Front Bulkhead, Gun Metal, For Traxxas Slash / Stampede

This is the ST Racing Ideas Aluminum Front Bulkhead
For the Traxxas Electric Stampede, Rustler, Bandit, or Slash 1/10 cars
and Nitro Slash.

FEATURES:
Made from aluminum, anodized black in color

CONSISTS OF:
One bulkhead
2 M30x14mm Phillips head screws

SPECS:
Length: 2-7/8" (73mm)
Width: 1-3/32" (281mm)
Height: 1-17/32" (39mm)

REMARKS:
This bulkhead can be installed on
Traxxas Stampede 4X4 VXL 2.4GHz RTR
Traxxas Stampede XL-5 2WD RTR w/7C Battery & Charger
Traxxas Rustler VXL 2.4GHz RTR
Traxxas Rustler XL-5 2WD RTR
Traxxas Bandit VXL 2.4GHz RTR
Traxxas Bandit Extreme Sports XL-5 RTR
Traxxas Slash 4X4 VXL TQi/2.4GHz RTR
Traxxas Slash 2WD TQi 2.4GHz RTR
Traxxas Slash 4X4 Ultimate VXL TQi RTR
Traxxas Slash F-150 SVT Raptor 2WD TQi
Traxxas Nitro Slash

Want another excellent product to enhance the above discussed product?

Battery Expansion Kit For Rustler/Stampede/Bandit

This is the Battery Growth Kit
for the Traxxas Rustler, Bandit and Stampede.

FEATURES:
Metal building and construction
Permits installation of taller multi-cell battery loads

CONSISTS OF:
Foam, battery posts and screws

NEEDS:
Setup on the vehicle

SPECS:
Height: 1.41" (36mm)

REMARKS:
Battery & receiver hold down is needed for the Stampede

This product compliments the above reviewed product.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on vehicle

This product compliments the main item here.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Get this product to boost the one you are reading around.

Heavy Duty Rod Ends, Black, (12Pcs)

These sturdy rod ends are made from injection molded black nylon and fit
Associated or Losi .168 suspension balls.

Right here is a excellent product that lots of others have bought at the very same time.

Fr Bumper/Skid Blk Nitro Slash

    This is the optional RPM Front Bumper and Skid Plate
for usage on the Traxxas Slash 2WD Short Course Racing Truck.

FEATURES:
Plastic building and construction
Black in color

CONSISTS OF:
One Front Bumper and Skid Plate

NEEDS:
Setup on the vehicle

REMARKS:
Likewise offered in Blue (RPMC0953)
Chrome (RPMC0954)

This product compliments the above reviewed product.

Aluminum Caster Blocks, Gun Metal, For Traxxas Slash / Stampede

This product compliments the above reviewed product.

Aluminum Oversized Front Knuckles W/Bearings, Gun Metal, For Tra

These are the Gunmetal Aluminum Front Knuckles from ST Racing
for the Traxxas Electric Slash 2WD, Stampede, Rustler, Bandit
and Nitro Slash.

FEATURES:
Gunmetal in color

CONSISTS OF:
2 Gunmetal Aluminum Front Knuckles
4 Ball Bearings

This product is often purchased with the above discussed product.



This is the ST Racing Hardened Polished Steel Lock-nut Design Hinge-pin Kit
For the Electric Traxxas Slash, Rustler, Stampede, and Bandit 1/10 trucks
and Nitro Slash.

FEATURES:
Sick of the stock hinge-pins revoking the A-arms? If you've
been running your Traxxas vehicle long enough, you most likely have
currently experienced this problem. ST Racing Ideas Heat Treated
Polished Steel Lock-Nut Design Hinge-Pin Kit will solve this problem
once and for all. CNC Machined from top quality 12.9 grade carbon
steel, that is then heat treated for increase in durability, and after that
polished for ultra smoothness. Nylon insert lock-nut at each end of
the hinge-pin prevents the pins from ever coming loose. This is a
great upgrade for your Traxxas Slash, Stampede, Rustler. Sold as a
complete set of 8 hinge-pins and lock-nuts.

This set has black-colored locknuts.

INCLUDES:
2 52mm hinge pins
2 48mm hinge pins
Two 35mm hinge pins
Two 29mm hinge pins
8 lock-nuts