Racers Edge 4" Black Tie Wraps (30)

This is a pack of thirty Racers Edge 4" long black zip tie covers. Zip tie covers make an incredible addition to your pit box, as you can use them to secure wires to your chassis, develop pull loops for your fuel tank and carry out quick repairs on the fly throughout a race to your vehicle body!

This thing praises the above discussed thing.

7 1/2 In Black Tie Wraps (25)

This is a pack of twenty 5 Racers Edge 7.5" long black zip tie covers. Zip tie covers make an incredible addition to your pit box, as you can use them to secure wires to your chassis, develop pull loops for your fuel tank and carry out quick repairs on the fly throughout a race to your vehicle body!

You will love this product if you have the product just above pointed out.



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is best for all electronic applications.

Get this thing to improve the one you are reading around.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Adapter
from Deans.

FEATURES:
This design gets rid of the possiblility of reverse polarity
connections
Supplies a protected connection for battery and motor connections

CONSISTS OF:
2 2-Pin Male Ultra Plug
Four brief pieces of Black diminish tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

REMARKS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

This thing praises the main item below.

Ultra Plug, Female (2Pk)

These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Removes the possibility of reverse polarity connections
Low resistance, compact size
Supplies a protected connection for battery and motor connections on
    R/C vehicles

CONSISTS OF:
2 WS Deans 2-Pin Female Ultra Plug Connectors with section of
    diminish tubing

NEEDS:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

REMARKS:
For Male end use WSDM1302
For both Male and Female use WSDM3001

Often gotten with the thing that you are currently reading about.



This is a Tube of JB Weld Medium Threadlocker.

FEATURES:
Temperature level resistant to 300°F
Suitable for 1/4 - 1" fasteners
OEM approved

CONSISTS OF:
6mL tube of threadlocker

SPECS:
Weight: .20 fl oz. (6mL)

You will love this product if you have the product just above pointed out.

Servo line Color Black and Red

Looking to clean up the appearance of your helicopter, plane of RC vehicle & safeguard your servo lines from chaffing? Servo Line Covering is a simple way to safeguard your servo wires, adding a clean, visual want to your RC machine, and can be set up in a matter of minutes. Select from our amazing line of different colors to include an entire new want to your RC machine!

Included In Package:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Install Servo Line Covering?

Simply eliminate your servo(s) from the receiver, measure the length of covering you will require for your servo wire(s), and open one end of the covering and insert the servo terminal within. It works best to “inch worm” your servo wire by holding the terminal inside the servo covering, and slowly inching the covering over the terminal, and pressing the terminal forward.

Once your servo wire is covered, cut off an appropriate sized piece of the consisted of heat diminish, and slide it over the covering till it is flush with the servo itself. Heat the diminish wrap with a soldering iron or heat weapon to diminish it down around the covering, thus giving you a flush, tight fit over the previously frayed servo covering. Do the very same with completion of your servo wire, taking care to leave the terminal bare so it can quickly connected into your receiver. Likewise, be sure to bear in mind of the servo wire polarity if you cover the complete wire – this will guarantee that you will understand exactly what instructions to plug your servo terminal into your receiver.