Pulse LIPO 5000mAh 7.4V (Receiver Battery)

Pulse Reciever Batteries - Can You Feel the Power?

Pulse receiver batteries inspire power, performance and value to the RC scene, allowing you to select the receiver pack of your choice at an expense & performance level that sets a new market standard.

Available in 2250mah, 3600mah and 5000mah packs TWO 7.4V, Pulse has you covered with a receiver pack that will not just fit your spending plan, however also your aircraft as well, allowing you to press your flights with a pack that will perform.

Pre-soldered with connectors allowing the battery to be plugged directly into your receiver, Pulse Ultra receiver batteries are ready for flight - pick what fits you!

Note: This receiver battery is designed for 1C charge rate and a 6C discharge rate - do NOT exceed greater than 1C during the charging of this LiPo battery. Any charge rate greater than 1C / discharge rate greater than 6C will immediately void the guarantee and very well might end up in pack destruction through fire. It is the end users obligation to guarantee proper safe charging practices, so please understand this.

Warning: This LiPo receiver battery is intended to power servos, receivers & other accessories onboard the aircraft, and remains in no other way designed for usage as a flight power system, such as powering a motor / ESC system. Due to the lower discharge rate and lighter gauge electrical wiring, any usage as a flight pack will immediately void the guarantee of this LiPo battery, and very well might cause battery failure.

Specs:
Voltage: 7.4V
Cell Count: TWO
Capacity: 5000mAh
Measurements: 102mm x 46mm x 21.5mm (LxWxH)
Weight: 200g
Balance Tap: JST-XH