Proline Mohawk SC 2.2"/3.0" Tire Fr Slash/SC10 (2)

These are the Pro-Line Mohawk 2.2"/3.0" Tires for use on the Traxxas
Slash, Slayer, Associated SC10 and HPI Blitz.

FEATURES:
Rubber building and construction
Fits Slash, Slayer, SC10 and Blitz automobiles

CONSISTS OF:
2 Mokawk Tires with Foam Inserts

NEEDS:
Installation on wheels

SPECIFICATIONS:
Outer Diameter:4.5"(115mm)
Inner Diameter: 2.2"/3" (55.9mm/76mm)
Width: 2" (50mm)

Several others have actually purchased this thing together with the thing that you are currently reading about.



These are the Pro-Line 2.2"/3" Slingshot SC Tires for use on the
Traxxas Slash, Slash 4x4, Slayer, Associated SC10 and the HPI Blitz.

FEATURES:
Rubber building and construction
Molded foam inserts

CONSISTS OF:
2 2.2"/3" Slingshot SC Tires and Foam Inserts

NEEDS:
Wheels

SPECIFICATIONS:
Outer Diameter: 115mm (4.5")
Inner Diameter: 56mm/79mm (2.2"/3")
Width: 50mm (2")

This is a fantastic addition to the thing currently being gone over.



These are the Pro-Line Front Split Sixer Red Bead-Loc On Black Wheels
for the 2 Wheel Drive Traxxas Slash.

FEATURES:
Nylon building and construction
Red in color
Black bead-locs
*NOTE* - Pro-Line does NOT advise these for use with brushless
systems

CONSISTS OF:
2 Front Split Sixer Wheels
Twelve 3x10mm Button Head Screws

NEEDS:
Tires

SPECIFICATIONS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 41.2mm (1.6")
Hex: 12mm

This is a fantastic addition to the thing currently being gone over.



These are the Pro-Line Rear Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the rear of the Traxxas Slash
front and rear of the Traxxas Slash 4x4
fornt and rear of the HPI Blitz
Nylon building and construction
Red in color
Red bead-locs
*NOTE* - Pro-Line does NOT advise these for use with brushless
systems

CONSISTS OF:
2 Rear Split Sixer Wheels

NEEDS:
Tires

SPECIFICATIONS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

This thing praises the main item below.



This is a pair of optional Pro-Line Black Split Six Wheels
for use with the Pro-Line ProTrac Suspension Kit
for the front and rear of the 2WD Traxxas Slash.
**Will not fit Slash 4x4.**

FEATURES:
Unfavorable 10mm balanced out for increased velocity, corner speed and
    driveability
Fits front and rear of the 2 wheel drive 1/10 scale Traxxas Slash
Lightweight one piece design with simulated bead-loc ring
Same track width as stock wheel
High strength, DuPont nylon material

CONSISTS OF:
2 Pro-Line Black Suspension Kit Split Six Wheels for the front
    and rear of the Traxxas Slash

NEEDS:
Using only with the ProTrac Suspension kit, PROC6066

SPECIFICATIONS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 1.6" (41.5mm)
Hex size: 0.47" (12mm)

COMMENTS:
Do not install these wheels by themselves on the Slash. Due to the
    unfavorable 10mm offset they should be utilized with the ProTrac suspension
    kit.
If utilizing on the rear of the Associated SC10, the 12mm Wheel Adapters
    (PROC6080) must be purchased.