Proline Interco TSL Super Swamper 2.2 G8 Tires (2)

This is a set of Interco TSL SX Super Swamper G8 Rock Terrain Tires
with Memory Foam from Pro-Line.

FUNCTIONS:
G8 (rock surface) substance
Black in color
Interco TSL SX Super Swamper reproduction design
Fits front or rear 2.2" wheels

INCLUDES:
Two Interco TSL SX Super Swamper G8 Rock Terrain Tires
Memory Foam

REQUIRES:
Wheels
Tire Glue DTXR2000, DTXR2002

SPECIFICATIONS:
Height: 5-1/4" (132mm)
Width: 2-1/4" (57mm)
Inner Diameter: 2.2" (56mm)

You will love this item if you have the item above discussed.

2.2 8-Hole Beadlock Black

These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
Eight hole design, built of super strong composite product
Gray aluminum ring
Fits 12mm hex centers
True beadlock design, no messy gluing needed

INCLUDES:
Two Axial 2.2 Beadlock Wheels in Black with ring installing hardware

REQUIRES:
Tires of modeler's option

SPECIFICATIONS:
Width: 1.4" (36mm)
Beadlock Diameter: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

Several others have acquired this item together with the item that you are currently reviewing.

2.2 Internal Wheel Weight Ring 57g/2oz

This is a 2.2 Internal Wheel Weight Ring from Axial.

FEATURES:
Fits all Axial 2.2" beadlock wheels
For use with the #AX30546 (AXIC0546) Wheel Weight Inserts
Includes weight to increase stability on difficult challenges
Advised for use on the front wheels to help with climbing up by
    decreasing the center of mass
Steel building and construction

INCLUDES:
2.2 Internal Wheel Weight Calling with Mounting Hardware

REQUIRES:
Fastening to wheel with consisted of hardware

SPECIFICATIONS:
Weight of Each Ring: 2oz (57g)

Below is a wonderful item that lots of others have purchased the same time.

Spurs 48DP 87T

This is the 48 Pitch 87 Tooth Spur Gear for the Scorpion Rock Crawler AXIC9001.

FEATURES:
Black plastic building and construction

INCLUDES:
One 48DP 87T spur gear

REQUIRES:
Installation on the Rock Crawler

Below is one more item that compliments the item being reviewed.



This is the ST Racing Concepts Aluminum Steering Linkage or
Rear Steer Conversion for the Axial SCX10/AX10.

FUNCTIONS:
Machined aluminum building and construction, silver in color

INCLUDES:
0.24 x 4.2" (6 x 106mm) Steering Link
0.24 x 1.3" (6 x 33mm) Brief Steering Link

Below is one more item that compliments the item being reviewed.



This is the ST Racing Concepts Sturdy Aluminum Steering Linkage Set
For the Axial Wraith 1/10 Rock Racer

FUNCTIONS:
The stock plastic steering linkage on the Axial Wraith is a common
complaint of powerlessness on this car, as the stock pieces have the tendency to
be sloppy and weak in moving the torque and power originating from
the steering servo. Our CNC Machined Aluminum Steering link features
7mm thick aluminum tubes for lower and upper steering links. The
upper link features a slight bent that allows for all the power and
torque from the servo to be transferred in a perpendicular angle to
the arm of the knuckle to ensure no power is loss in the transfer.

This linkage set is silver in color.

INCLUDES:
One long link tube
One brief link tube
4 M39x16mm setscrews with 1.5mm hex socket
One M39x22mm caphead screw with 2.5mm hex socket

SPECIFICATIONS:
Long link, length: 6-7/16" (164mm)
size: 7mm (9/32")
Brief link, length: 2-3/4" (70mm)
size: 7mm (9/32")

RREQUIRES:
Turnbuckle ends from the Axial Linkage Set (AXIC0057) (longer
directly ends on the part tree) and the stock ball links from
the vehicle.

COMMENTS:
This link set can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Kit (AXID9020)