Proline Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Set for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts enable a wide array of bodies
    to be used consisting of rally vehicle bodies
Constructed of nylon, black in color
Screw-on body mount system removes metal clips

INCLUDES:
Front and Rear Body Installs and Posts with Mounting Hardware

This thing praises the main item right here.



This is the Sidewinder SCT ESC and 3800kV Motor Combo from Castle Creations.

FEATURES:
Suitable for 2WD or 4WD short course racing or yard bashing
Neu-Castle 4 pole 1410 1Y motor has 50% more torque than Castle's
    CM36 series
Sidewinder SCT has 40% higher power handling than previous
    Sidewinder 1/10 scale ESC
Castle Link suitable (Field Link Portable Developer Automobile Card
    (CSEM6300) needed, not consisted of)
Proportional brake with reverse lockout
Water resistant*

INCLUDES:
Castle Creations Sidewinder SCT ESC, 4mm Bullet Motor Connectors and
    Neu-Castle 4 pole 1410 1Y Brushless Motor, Instructions

REQUIRES:
Battery port of modeler's choice

SPECS:
ESC
Input Voltage: Maximum 2S LiPo
Brake: Proportional
Reversible: Yes, with lockout
Width: 1.48" (37.5mm)
Length: 1.93" (49mm)
Height: 1.18" (30mm)
Weight: 2.29oz (65g) without battery port
    Motor:
Pole Count: 4
Stator Lamination Density: 0.0078" .2mm
Bearings: CNC ranked Japanese bearings
Measurements: 1.4 x 2.1" (36 x 53mm)
Shaft Size: 1/8" (3.2mm)

REMARKS:
*Not meant for operation while submerged in liquid. If unit is
    operated in damp conditions, wash with fresh water to eliminate dirt
    or corrosives, then fully dry unit.
Maximum advised vehicle weight is 6.5pounds (2.95kg)

Get this thing to improve the one you are reading about.



Lots of others have gotten this thing along with the thing that you are presently reading about.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Set for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Decreases the chassis 1" (25.4mm) for much better handling and higher
    catching speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

INCLUDES:
Chassis
Lower Chassis
Two Nerf Bars
Battery Hold Down with Front and Rear Retainers
Two Front Shock Springs
Hardware and Instructions

Right here is a great thing that many others have bought at the very same time.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for designs with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

This thing is often gotten with the above mentioned thing.

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FUNCTIONS:
Pinion gear with set screw, Silver in color

INCLUDES:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

REQUIRES:
Setup

SPECS:
Outer Size: 14mm (9/16")
Inner Size: 11mm (7/16")