Proline Body Mount Thumbwasher Kit

This is the Pro-Line Body Mount Thumbwasher Kit.

FEATURES:
For the #6070-00 (PROC7000), #6071-00 (PROC7100), #6087-00
    (PROC6087) Pro-Line Body Mount Kits

CONSISTS OF:
Four each Thumbwashers, 4x12mm Set Screws, and O-Rings

This product is often bought with the above discussed product.



This is the optional Pro-Line Body Mount Replacement Package
for the Traxxas 2WD Slash.

FEATURES:
Constructed of nylon, black in color
Replaces body mounts in the Pro-Line #6070-00 (PROC7000) Extended
    Body Mount Package
Entirely adjustable mounts fit any body perfectely
Long body mounts consisted of to fit rally vehicle bodies
Screw-on body mount system eliminates metal clips

CONSISTS OF:
Front and Rear Body Installs and Publishes Tree

Here is a excellent product that several others have actually bought at the exact same time.



This is a CVD Coupling Rebuild Package used for various Monster Trucks.
Works for the TMaxx/Emaxx, Revo, Tamiya TNX, Savage 21 & 25, Losi LST

FEATURES:
Black oxide rust preventive finish on the coupling

CONSISTS OF:
(2) Cross pin 2.5 x 16mm
(2) Coupling 6mm diameter x 9mm length
(2) Set screw 4.0 x 3mm

You will certainly like this item if you have the item previously stated.

Extended Fr/Re Body Mounts Revo 3.3/Summit

These are the optional Pro-Line Extended Front and Rear Body Installs
for the Traxxas Revo 3.3, E-Revo, and Summit.

FEATURES:
Permits any body to be installed to the Traxxas Revo 3.3, E-Revo, and
Summit
Secure-Loc Cap screw-on body mount system eliminates body clips
Nylon building and construction, black in color

CONSISTS OF:
Front and Rear Body Installs and Publishes
Installing Hardware

This product is often bought with the above discussed product.

Slash 2Wd Low Cg Chassis Conversion Kit

This is the optional Low CG Conversion Package for the
1/10 scale 2WD Traxxas Slash.

FEATURES:
Decreases the chassis 1" (25.4mm) for much better handling and greater
    cornering speed
Holds battery and electronics as deep in chassis as possible
45% lower battery position

CONSISTS OF:
Chassis
Lower Chassis
2 Nerf Bars
Battery Hold Down with Front and Rear Retainers
2 Front Shock Springs
Hardware and Directions

Often bought with the product that you are presently checking out.

Front A-Arm, For Traxxas Slash, Rustler, Stampede, Nitro Slash,

This is a pair of Heavy Duty Front-A Arms in Red
for the Traxxas Electric Rustler, Stampede, Bandit, Slash and Nitro Slash.

FEATURES:
Composite nylon building and construction, red in color
Almost 25% lighter than stock versions
Increased clearance locations in the external part enables increased
    sag travel when used with RPM #80372 and #80382 extra-large
    bearing providers

CONSISTS OF:
2 Heavy Duty Front-A Arms in Red

Get this product to improve the one you read around.

Extended Fr/Re Body Mnts Slash 4x4

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 4x4 Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts permit a variety of bodies
    to be used consisting of rally vehicle bodies
Constructed of nylon, black in color
Screw-on body mount system eliminates metal clips

CONSISTS OF:
Front and Rear Body Installs and Publishes with Installing Hardware