Align T-REX 700E DFC Super Combo

Direction(3GX Programmable Flybarless System):
Brand brand-new revamped 3GX represents a brand-new generation of multi function flybarless system. The dramatically improved efficiency will create instant impact on any lovers.
3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with complete assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a simple procedure. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphical highlighted direction on the computer setup software directs the user through a step by step setup procedure, permitting fast setups without leaving out any steps.
Support Bluetooth connection. With the soon to be launched Bluetooth connection package, 3GX can be set wirelessly from a PC. Ultimately there will likewise be smartphone apps permitting live changes to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is had to decrease electronic wire clutters.
Custom specifications have been opened up in 3GX to allow pilots to tweak many settings for swashplate and rudder. Settings export feature enables custom settings to be shared among pals.
3GX makes use of brand brand-new gyroscope sensors of the highest requirements when compared to other flybarless systems currently on the market, permitting it to be used under harsh conditions. Dual axis plus rudder sensing unit dramatically improves swashplate and rudder correction accuracy compared to last generation 3G. This is plainly noticeable in stable hover along with highly aerobatic routines.
Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The superior vibration resistant quality is evident even when installed with more difficult double sided installing tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The outcome is a remarkable stability improvement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette settlement function, 3GX has the ability to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily achieved with accuracy.
3GX's rudder enables consistent rudder feel even under high speed conditions. This exceptional control feel will allow pilot of all skill levels to experience the best combination between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self support, hold position along with elevation, and even self-governing way point flights along with return home.

Specification(T-REX 700E V2):
1. Geared up with the low CG DFC rotor head, successfully decrease wind resistance during flight, providing the most direct and accurate control feel back to the pilot, and displays exciting 3D efficiency and inconceivable flight speed.
2. Brand brand-new CCPM direct servo linkage style to get rid of the weight of double push-pull linkage system, making it possible for faster and more accurate control response.
3. Integrated servo installs on the main shaft bearing obstructs, permitting cyclic servos to be installed directly onto the bearing obstructs, which together with the composite material frame plates, developing a tidy and uncluttered appearance.
4. Utilizes composite carbon material combination method on frame structure for ease of maintenance and high rigidness. Increased front opening area to allow for easier battery setup.
5. Ingenious sliding battery tray rails imbedded into the 3K side frames, with trademarked spring loaded latching system, permitting fast battery access along with battery security.
6. Top installed motor base bringing the motor's center of mass better to turning disc, improving 3D dexterity and permitting blade drafts to cool the motor successfully.
7. Motor install includes third bearing block to offer motor shaft assistance, successfully decrease torque induced shifts, and lessen gear striping problem.
8. Utilizes high spec MOD1 112T CNC helical main gear and MOD 1 tail drive helical gear to increase gear mesh area, and lessen gear sound during flight.
9. Top installed ESC platform to benefit from main blades air flow for reliable cooling.
10. New lightweight H-shaped electric device retention system for security, along with ergonomically proper style to streamline operation .
11. Geared up with 750MX series high performance brushless motor, with ribbed case and fan to dramatically increase cooling effect, and improve overall power output.
12. Brand brand-new gear box with more streamlined style likewise allows for easier disassembly.
13. High quality brand-new tail transmission style, combined with brand-new double point installed tail pitch control assembly to lessen slops and increase rudder control accuracy.
14. High torque rated one way bearing base.
15. High accuracy bearing supported double push point rudder control style.
16. High speed rated thrust bearings incorporated into tail blade grips.
17. Geared up with third bearing main shaft assistance to increase rigidness, satisfying the requirements of extreme 3D maneuvers.
18. New lightweight landing equipments.
19. High grade painted fiberglass canopy with brand-new 4 point anti-vibration installing system to streamline setup.
20. New CNC aluminum alloy installing plate.

Users need to have a particular concept of security to operate the R/C helicopters.
Be sure to read and comply with associated security notes of instruction manual prior to flying.

Spec(3GX Programmable Flybarless System):
Operating Temperature level:-10~60 degree
X and Y axis Operating Angle Variety:-300~+300 degree
Z axis Operating Angle Variety:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system assistance
Integrated in governor function
Maximum working voltage:8.5V
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without using a PC
Suitable with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type recognization

Spec(T-REX 700E V2):
Length: 1345mm
Height: 360mm
Width: 208mm
Main Blade Length: 690mm
Main Rotor Diameter: 1562mm
Tail Rotor Diameter: 281mm
Motor Drive Gear:12T
Main Drive Gear:112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 1:9.33:4.37
Weight(With Motor): 2900g

Devices:
T-REX 700E DFC Kits Set x 1set
Aluminum Tail Boom x 1
3K Carbon Fiber Tail Boom x 1
690 3G Carbon Fiber Blades x 1set
750MX Brushless Motor(530KV) x 1
3GX Flybarless system x 1
DS615 Digital Servo x 3
DS650 Digital Servo x 1
Castle ICE2 HV 120 Brushless ESC x 1
6A External BEC x1
105mm 3K Carbon Fiber Tail Blades x 1set

Radio transmitter and electronic devices required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 4500 ~ 5200mAh x 2
TWO Li-Po 1900 ~ 2300mAh x 1
Dial Pitch Gauge