APC 12x6 Sport Propeller

This is a 12x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building and construction reduces turning mass for
    greater output and longer life.
Reinforcing carbon fibers assist preserve real, constant pitch at
    Any RPM.
"C2" design (see COMMENTS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props require balancing, this is CRUCIAL, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or FOXQ1520 (Metric)

SPECIFICATIONS:
Length: 12" Pitch: 6
Density at center: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" stands for the production run in which it was made.

Get this product to enhance the one you read around.

11x6 Sport Propeller

This is a 11x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building and construction reduces turning mass for
    greater output and longer life.
Reinforcing carbon fibers assist preserve real, constant pitch at
    any rpm.
"C2" design (see COMMENTS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props require balancing, this is CRUCIAL, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 11" Pitch: 6
Density at center: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" mean the production run in which this prop was made.

The listed below product additionally pairs truly well with the product being talked about.

13x6 Sport Propeller

This is a 13x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building and construction reduces turning mass for
    greater output and longer life.
Reinforcing carbon fibers assist preserve real, constant pitch at
    any rpm.
"C2" design (see COMMENTS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props require balancing, this is CRUCIAL, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 13" Pitch: 6
Density at center: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" means the production run in which the prop was made.

This is a amazing enhancement to the product presently being talked about.

2 1/4" Spinner (2 Blade) Black

This is the Dubro 2-1/4" Diameter Black Spinner.

FEATURES:
Constructed of 100% Virgin Nylon for optimum strength.
Pre-trimmed for two blade propeller.
Uses a unique nylon insert lock design for attaching the backplate
    and spinner-giving a strong and secure hold.
Four shaft adapters, 6mm, 1/4", 7mm, 5/16", eliminates need to drill
    out backplates.

INCLUDES:
One Dubro 2-1/4" Diameter Black Spinner with backplate, four shaft
    adapters, and two 3.5mm x 18mm socket head cap screws.

REQUIRES:
Aligning pins in nose cone to backplate and attaching into pre-
    set up locknuts with the two socket head cap screws.
7/64" ball driver

SPECIFICATIONS:
Diameter: 2.25" (57mm) at base
Length: 2.44" (62mm) from backplate to tip