APC 11x6 Sport Propeller

This is a 11x6 Airplane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight molded nylon building decreases turning mass for
    higher output and longer life.
Reinforcing carbon fibers assist keep true, constant pitch at
    any rpm.
"C2" design (see REMARKS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props need balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 11" Pitch: 6
Density at center: 1/2" Hole diameter: 1/4"

REMARKS:
The "C2" stand for the production run in which this prop was made.

This item compliments the above gone over item.

Prop Adapter with Collet, 1/8"




Want one more fantastic item to compliment the above stated item?

12x6 Sport Propeller

This is a 12x6 Airplane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight molded nylon building decreases turning mass for
    higher output and longer life.
Reinforcing carbon fibers assist keep true, constant pitch at
    Any RPM.
"C2" design (see REMARKS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props need balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or FOXQ1520 (Metric)

SPECIFICATIONS:
Length: 12" Pitch: 6
Density at center: 1/2" Hole diameter: 1/4"

REMARKS:
The "C2" means the production run in which it was made.

This item compliments the main item here.

3Mm Steel Hex Nuts-Metric

    These are 3mm Hex Nuts from Du-Bro's Car Line (Metric).

FUNCTIONS:
Zinc plated, steel metric hex nuts.
These are designed for usage on R/C cars.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Diameter: 3.0mm

Want one more fantastic item to compliment the above stated item?

10x7 Sport Propeller

This is a 10x7 Airplane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight molded nylon building decreases turning mass for
    higher output and longer life.
Reinforcing carbon fibers assist keep true, constant pitch at
    any rpm.
"C2" design (see REMARKS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props need balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or FOXQ1520 (Metric)

SPECIFICATIONS:
Length: 10" Pitch: 7
Density at center: 1/2" Hole Diameter: 1/4"

REMARKS:
The "C2" number stand for the production run of this propeller.