Gens Ace 400mAh 2S 7.4V 35C Lipo b

Below is a terrific thing that numerous others have actually purchased the very same time.

SCX24 Deadbolt 1/24th Scale Elec 4WD - RTR, Green

Key Features:
• Includes radio system, ESC and transmitter batteries
• Includes motor and on-board LiPo battery
• Reasonable narrow-stance rock spider body in olive green or red
• Molded roll cage with sensible light bar
• Reasonable motorist figure and lots of other scale information
• Formally licensed KMC XD229 Machete Crawl wheels
• Formally licensed Nitto Path Grappler M/T tires (S30 substance, big block tread)
• Full-time 4WD
• Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels
• Steel front and rear axles, front stub axles and dogbones offer strength and sturdiness
• Rugged steel C-channel frame rails with bracing keep everything rigid and lined up
• Front and rear axles consist of a two-piece, molded plastic solid axle design
• 3-Link front and 4-link rear suspension supply optimum handling
• Coil-over shocks with simulated tank and long lasting plastic suspension links provide proven Axial crawling performance
• Front and rear differentials each house a worm equipment setup to power the axles and develop higher ground clearance. Worm equipment drive also provides a low equipment ratio to reduce torque twist
• Two LEDs in the front bumper for night driving
The SCX24™ Deadbolt™ 4WD is the first Axial® off-roader in 1/24 scale. At less than 8” long, it’s the best rig to take along on your hiking, camping, and other outdoor and indoor experiences — offering factory-assembled ease, scale looks, and positive handling on any trail.

Even new modelers driving the SCX24 chassis will be well-equipped to tackle difficult climbs and rough trails. Like the larger SCX10™ chassis, this smaller sized variation uses a lot of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward.

For the most trusted handling, the SCX24 chassis features a three-link front and four-link rear suspension. The mix of coil-over shocks and long lasting plastic suspension links provides Axial-worthy crawling performance even at this little scale. The worm equipment drive setup allows a high ground clearance plus a low equipment ratio that minimizes torque twist.

Powered by a consisted of 180-size motor and LiPo battery, the SCX24 Deadbolt flaunts competence and charisma on the trails. Take a look at that Deadbolt body — with its narrow position, bulging hood, sensible motorist figure, and molded roll cage with sensible light bar. The realism continues right down to the ground, where you’ll find licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Path Grappler tires.

Adding much more to its beginner appeal, the SCX24 Deadbolt comes 100% total and prepared to run. Whatever required for action remains in the box: put together and ended up car; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver system; Dynamite® 88T brushed electrical motor and 350mAh 2S 7.4V LiPo battery; USB LiPo battery charger; and even 4 AA cells for the transmitter!

What's in the Box?
(1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck
    (1) Axial AE-6 ESC/receiver combo (set up)
    (1) Dynamite® 88T brushed electrical motor (set up)
    (1) Axial AS-1 guiding servo (set up)
(1) Axial® AX-4 2.4GHz 2-channel radio
(4) AA transmitter batteries
(1) 350mAh 2S 7.4V LiPo battery
(1) USB LiPo battery charger
(1) Item Handbook




STEEL C-CHANNEL CHASSIS FRAME RAILS
Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and strong steel c-channel frame rails with bracing to keep everything undamaged and lined up.
 

DYNAMITE® 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor provides the correct amount of torque to assist rise steep climbs. It's mated to a steel motor install to keep flex to a minimum, which helps protect the equipments.
 


WORM GEARS
The front and rear differentials each house a worm screw and worm equipment setup to get the power to the axles and develop higher ground clearance.
 

DURABLE STEEL AXLES
Steel front and rear axles, front stub axles together with steel dogbones offer strength and sturdiness to keep things running throughout difficult climbs and rough trails.
 


SPLINED DRIVE SHAFTS
The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 

COILOVER SHOCK ABSORBERS
Even at this little scale, the mix of coilover shocks with simulated reservoirs and long lasting plastic suspension links provides the crawling performance you have actually known and anticipate from Axial.
 


FRONT AND REAR SOLID AXLES
The front and rear axles consist of a two piece, formed plastic solid axle design. For optimum handling, the SCX24™ suspension features a three-link front and four-link rear setup.
 


LED LIGHTS INCLUDED
Two brilliant LED lights are consisted of and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.
 

4-LINK REAR SUSPENSION
The suspension geometry utilizes a 4-Link design for the back which is enhanced to reduce axle steer and torque twist. We have actually also consisted of additional suspension links for changing your wheelbase length.
 


KMC XD229 MACHETE CRAWL WHEELS & NITTO TRAIL GRAPPLER M/T TIRES
Formally licensed KMC XD Machete wheels are famous in the off-road world. They are formed in black and feature sensational scale information, in spite of the little scale.
The formally accredited Nitto Path Grappler M/T Tires use a great blend of off-road performance while still maintaining outstanding composure for on-road use.
 

HINGED BODY SYSTEM
The hinged body system offers simple access to on-board components. You can rapidly reach the battery and chassis by getting rid of just 2 body clips and swinging the body up.
 


FULL BALL BEARINGS
Just because the SCX24™ is smaller sized in size does not suggest the features need to do the same. No bushings discovered here, instead the drivetrain is freely spinning on sealed cartridge bearings throughout the entire car.
 

AXIAL AS-1 SERVO
Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for guiding precision, while also supplying security for the servo equipments in the event of a bind or impact.
 

Requirements

Type: Crawler
Scale: 1/24
Length: 7.8" (199.5mm)
Width: 3.9" (99.5mm)
Height: 4.73" (120.2mm)
Ground Clearance: 1.06" (27mm)
Wheepoundase: 5.25" (133.5mm)
Weight: 0.5lb (0.22kg)
Chassis: Stamped steel rails
Suspension: Solid axle, front and rear
Drivetrain: 4WD
Tire Type: Nitto Path Grappler M/T, big block tread
Speed Control: AE-6 ESC receiver/combo
Radio: AX-4 2.4GHz 2-channel
Servos: AS-1 steering servo
Batteries: 7.4V 350mAh 30C LiPo (consisted of)
Charger: USB LiPo battery charger (consisted of)
Equipment Pitch: 32-Pitch
Wheel Size: 0.48" (12.4mm) width, 1.0" (26mm) size
Kit/RTR: RTR
Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm)
Body: Painted and cut Axial Deadbolt
Ball Bearings: Complete body
Is Assembly Required: No