Racers Edge 4" Black Tie Wraps (30)

This is a pack of thirty Racers Edge 4" long black zip tie wraps. Zip tie wraps make a remarkable addition to your pit box, as you can utilize them to secure wires to your chassis, develop pull loops for your fuel tank and carry out fast repairs on the fly throughout a race to your automobile body!

This thing praises the above discussed thing.

7 1/2 In Black Tie Wraps (25)

This is a pack of twenty five Racers Edge 7.5" long black zip tie wraps. Zip tie wraps make a remarkable addition to your pit box, as you can utilize them to secure wires to your chassis, develop pull loops for your fuel tank and carry out fast repairs on the fly throughout a race to your automobile body!

You will love this thing if you have the thing just above stated.



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is ideal for all electronic applications.

Get this thing to improve the one you read about.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design removes the possiblility of reverse polarity
connections
Offers a safe and secure connection for battery and motor connections

CONSISTS OF:
2 2-Pin Male Ultra Plug
4 short pieces of Black shrink tubing

REQUIRES:
Soldering to wire
Soldering Iron, HCAR0775

REMARKS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

This thing praises the main item right here.



These are 2 W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Removes the possibility of reverse polarity connections
Low resistance, compact size
Offers a safe and secure connection for battery and motor connections on
    R/C vehicles

CONSISTS OF:
2 WS Deans 2-Pin Female Ultra Plug Connectors with section of
    shrink tubing

REQUIRES:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

REMARKS:
For Male end use WSDM1302
For both Male and Female use WSDM3001

Often acquired with the thing that you are presently checking out.



This is a Tube of JB Weld Medium Threadlocker.

FEATURES:
Temperature level resistant to 300°F
Suitable for 1/4 - 1" fasteners
OEM approved

CONSISTS OF:
6mL tube of threadlocker

SPECS:
Weight: .20 fl oz. (6mL)

You will love this thing if you have the thing just above stated.

Servo line Color Black and Red

Looking to tidy up the appearance of your helicopter, plane of RC automobile & protect your servo lines from chaffing? Servo Line Covering is an easy way to protect your servo wires, adding a clean, visual look to your RC maker, and can be installed in a matter of minutes. Pick from our amazing line of varied colors to sack a whole new look to your RC machine!

Included In Plan:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Install Servo Line Covering?

Simply eliminate your servo(s) from the receiver, determine the length of covering you will require for your servo wire(s), and open one end of the covering and place the servo terminal within. It works best to “inch worm” your servo wire by holding the terminal inside the servo covering, and slowly inching the covering over the terminal, and pushing the terminal forward.

Once your servo wire is covered, cut off a suitable sized piece of the included heat shrink, and slide it over the covering till it is flush with the servo itself. Heat the shrink wrap with a soldering iron or heat weapon to shrink it down around the covering, hence providing you a flush, tight fit over the formerly frayed servo covering. Do the exact same with the end of your servo wire, being careful to leave the terminal bare so it can easily connected into your receiver. Also, be sure to remember of the servo wire polarity if you cover the full wire – this will guarantee that you will understand what instructions to plug your servo terminal into your receiver.