Pulse LIPO 5000mAh 7.4V (Receiver Battery)

Pulse Reciever Batteries - Can You Feel the Power?

Pulse receiver batteries inspire power, efficiency and value to the RC scene, enabling you to choose the receiver pack of your option at a cost & efficiency level that sets a new market standard.

Available in 2250mah, 3600mah and 5000mah packs 2S 7.4V, Pulse has you covered with a receiver pack that will not just fit your budget plan, however also your aircraft too, enabling you to press your flights with a pack that will perform.

Pre-soldered with adapters enabling the battery to be plugged directly into your receiver, Pulse Ultra receiver batteries are prepared for flight - pick exactly what fits you!

Note: This receiver battery is created for 1C charge rate and a 6C discharge rate - do NOT surpass higher than 1C throughout the charging of this LiPo battery. Any charge rate higher than 1C / discharge rate higher than 6C will immediately void the guarantee and extremely well may wind up in pack damage via fire. It is the end users duty to guarantee appropriate safe charging practices, so please be aware of this.

Warning: This LiPo receiver battery is planned to power servos, receivers & other devices onboard the aircraft, and remains in no other way created for use as a flight power system, such as powering a motor / ESC system. Due to the lower discharge rate and lighter gauge wiring, any use as a flight pack will immediately void the guarantee of this LiPo battery, and extremely well may trigger battery failure.

Requirements:
Voltage: 7.4V
Cell Count: 2S
Capacity: 5000mAh
Dimensions: 102mm x 46mm x 21.5mm (LxWxH)
Weight: 200g
Balance Tap: JST-XH