Traxxas Wheelie Bar Assembled-Green Stampede/Rustler/Bandit

This is an optional Wheelie Bar in Green for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, neon green in color
Installs at back of chassis to prevent car from flipping over
    throughout wheelies

INCLUDES:
Put together optional Wheelie Bar with installing guidelines and
    hardware

NEEDS:
Attaching to back of chassis

This thing praises the main item here.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Versatile plastic building, green in color

INCLUDES:
RPM Wide Front Bumper in Green

SPECIFICATIONS:
Length: 2.7" (70mm) determined at center
Width: 6.2" (157mm)
Density: 0.12" (3.2mm)

This thing praises the main item here.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, blue in color
Installs at back of chassis to prevent car from flipping over
    throughout wheelies

INCLUDES:
Put together optional Wheelie Bar with installing guidelines and
    hardware

NEEDS:
Attaching to back of chassis

Numerous others have gotten this thing along with the thing that you are presently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programming ability via Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for use in almost every environment (not intended for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes many stock brushed motors
4 magnet, four pole rotor for greater torque
1.4" size slotted stator
Easily removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Switch, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery connector of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)

Want another great thing to compliment the above discussed thing?

Antenna Tube W/ Cap, Black

This is a conventional replacement Antenna Tube with Cap from Dubro
This item can be utilized anywhere an antenna tube is had to support
a receiver antenna wire.

FEATURES:
Black plastic building

INCLUDES:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

NEEDS:
Absolutely nothing. This is a direct fit part for any boat, car, etc. that uses
    a conventional size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Diameter: 1/8" (3.2mm)