PowerBox Systems GmbH iGyro 1e

• Ultra-precise single-axis MEMS sensing unit


• Regulative algorithm designed particularly for fixed-wing design aircraft


• Single axis shared by 2 servos, each independently variable


• Conventional PWM input and output signals


• Gain input for in-flight level of sensitivity modification


• Heading or Normal mode, switchable in flight


• Essential servo-match and reverse function


• Gyro Sense x 4 function for large, sluggish designs


• Variable frame-rate


• 16-bit processor for quickly, high-resolution signal processing

Just like the iGyro 3e, the outstanding feature of the iGyro 1e is simply how simple it is to utilize. The device can be used instantly after it is unpacked: plug in, repair in location, fly.

In every respect its performance is as good as the renowned larger iGyro systems, and the little version imparts exactly the exact same iGyro sensation. The extra integral features are a world's very first in this class:

Two outputs can be set up independently of each other, both in regards to gyro impact and control function. This means: it is possible to adjust output 2 individually for the gyro's direction of impact, and the servo's direction of rotation, end-points and centre. This integral servo-match function can be made use of, for example, to utilize a single channel to manage the rudder and steerable nosewheel, but set different gyro functions for both. Normally the nosewheel may be set up with a Heading function, but the rudder with Normal gyro function just. It is likewise possible to assign the gyro function to 2 ailerons without needing to forfeit differential travel.

Another useful feature is the facility to keep gyro gain instantly: if you lack channels, you can establish the iGyro 1e once utilizing a receiver output, then detach the gain input at the receiver; the set gain value is now instantly kept. The receiver output formerly used is now offered again for other functions.

The plan is rounded off by 2 extra functions: frame-rate modification and Gyro-Sense x 4, which is designed for large, sluggish designs. All the parts used in the iGyro 1e satisfy the exact same high quality standards as the large iGyro systems, and the device is 100% “Made in Germany”. Although the iGyro 1e is an apparent option for small designs, its quality means that it likewise guarantees the highest standards of accuracy and security in valuable High-End models.

The iGyro 1e can be installed in any design where there is just a requirement to stabilise one axis, whether the design is a glider, a jet or a power design. The iGyro 1e's micro size even permits it to be squeezed into any F3B and F5J glider, and even in an RC design vehicle, which will then preserve its specific heading with excellent reliability!

Technical Data

• Running voltage: 4.0–9.0V


• Existing drain Power-on state: 20mA


• Maximum load current: 10A


• Signal input: PWM


• Servo sockets: 2


• Servo signal resolution: 0,5µs


• Gyro guideline: Heading- and Normalmode


• Gyro sensing unit type: MEMS


• Number of sensing unit axes: 1


• Dimensions: 33 x 10 x 5.5 mm


• Weight: 7.5g, incl. wires


• Temperature level range: -30°C to +75°C