Pit Bull 1.55 Growler At/Extra W/Komp Kompound, Crawler Tire

Pit Bull Growler AT/Extra 1.55 Scale Cralwer Tires are miniaturized variations of the renowned Pit Bull Growler LT 1:1 tire. With distinct multi-varied directional tread you get a directional look with non-directional capability. These Scale Growlers have been created to increase control while improving stability and contact spot, providing outstanding lateral bite, amazing stickiness and exceptional traction.

Features:

Komp Kompound: Improves and better as they break in and you can use them for your day-to-day hobby time as well as competition.
Multi-varied Special Tread Blocks: With numerous varied lugs and edges, these assistance to optimize traction particularly in off-camber situations.
Inside Ribbing: Supplies sidewall support and stability.
Thicker Beads: More surface area for the Beadlocks to bite on.
Integrated Sidewall Protectors: Bands of rubber in the sidewall that add support and control.
Alternating Center Lugs: Increased biting edges for improved traction.
Sipes: Looks like the real tire and helps increase traction.
Over-the-Shoulder Lugs: Wraps down the sidewall and adds extra strength & traction to the shoulder & sidewall areas.
4.19 inch Unmounted Diameter: These tires are right in the "Sweet Spot" for a lot of Scale rigs (Measurements may differ depending on installed rim utilized).
Foam Included: Two 2 phase foams created to highlight the efficiency of our 1.55 Growler Scale tires. Need to be usable with other tire brand names as well.

Specifications:

Compound: Komp Kompound

Rim: 1.55"

Width: 1.43"*

Outer Diameter: 4.65"*

Weight: Approximate. 2.4oz per tire

Outer foam insert: 110mm (OD) x 72mm (ID) x 43mm (Thick) and the density is 25kg/m3 - approximate measurements*

Inner foam insert: 72mm (OD) x 36m (ID) x 28mm (Thick) and the density is 32kg/m3 - approximate measurements*

*Dimensions may differ depending on mounting rim utilized

Want one more wonderful thing to enhance the above stated thing?

Caphead Screw, M2.5X8mm, Hexhead (10Pcs)

This is a bundle of ten 2.5x8mm Caphead Screws from HPI.

FEATURES:
Steel building

INCLUDES:
Ten 2.5x8mm Caphead Screws

NEEDS:
2mm hex wrench, GPMR8011

SPECIFICATIONS:
Length: 8mm
Diameter: 2.5mm