Pinecar Pinecar Wedge

Develop Your very own Original Vehicle Design with the Basic Wedge from PineCar.

FEATURES:
Carefully picked, fine-grained soft wood.
Easy to shape and sand.
This block of wood works as the platform on which you will develop
    and build your derby car.
Pre-cut, plain wedge shaped block.
Pre-cut axle grooves.
Cut out your own design!
Instructions enclosed.

INCLUDES:
One Wedge Wood Block Body

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Wheels
Axles
Weight(s)
Pencil
Paint

SPECS:
Length: 7" (178mm)
Width: 1-3/4" (43mm)
Height: from 1" to 1/8" (25mm - 30mm)

REMARKS:
The following products are helpful for building and showing your
    car: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Structure & Racing Book
PINY1382--Racer Show Stand

Want an additional wonderful item to compliment the above mentioned item?



This is a .25oz Tube of Graphite
from Pine-Pro Competition Components.

FEATURES:
An unique mix of micron size graphite particles formulated to
    minimize the coefficient of friction and offer your car the winning
    edge.
High in carbon material, offer it superior lubricating characteristics.
Will not draw in dust and dirt.
Perfect dry lubricant for application on many surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECS:
Net Weight: .25oz (7.1g)

Get this item to enhance the one you are reading around.

Pinecar Block

Develop Your very own Original Vehicle Design with the Basic Block from PineCar.

FEATURES:
Carefully picked, fine-grained soft wood.
Easy to shape and sand.
This block of wood works as the platform on which you will develop
    and build your derby car.
Pre-cut, plain block.
Pre-cut axle grooves.
Cut out your own design!
Instructions enclosed.

INCLUDES:
One Wood Block Body

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Wheels
Axles
Weight(s)
Pencil
Paint

SPECS:
Length: 7" (178mm)
Width: 1-3/4" (43mm)
Height: 1-1/4" (32mm)

REMARKS:
The following products are helpful for building and showing your
    car: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Structure & Racing Book
PINY1382--Racer Show Stand

This item compliments the above reviewed item.

Adjustable Stick-On Weights 2 oz

This is an Adjustable Stick-On Weight Set from Pine Car.

FEATURES:
The heavier your car, the faster it goes.
    Incremental weights permit you to change your car's weight.
Remove portion of weight required with a pliers.
Attach to bottom of car using the consisted of double stick tape.
Carded product packaging with directions on the rear.

INCLUDES:
One Adjustable Stick-On Weight Set.

REQUIRES:
Pliers

SPECS:
Length: 3-7/8" (98mm)
Width: 1-1/2" (38mm)
Weight: 1oz (28g) per weight

This is a superb addition to the item presently being reviewed.

Racing Wheel

This is a Set of Four Racing Wheels from Pine Car.

FEATURES:
Racing Wheels are the very same high quality wheels and axles discovered in
    Pine Vehicle deluxe and standard car kits.
Includes 4 wheels, 2 axles and 5 hubcaps.
Black plastic construction.

INCLUDES:
Four Racing Wheels

SPECS:
Diameter: 1-1/8" (29mm)