Pinecar Basic Car Kit

Develop Your very own Original Car Design with the Basic Block Package from PineCar.

FEATURES:
Thoroughly picked, fine-grained soft wood.
Easy to shape and sand.
This block of wood functions as the platform on which you will develop
    and build your derby car.
Ideal for those who wish to produce their own special design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, Two Solid Axles, Four Wheels,
5 Wheel Retainers, Four Axles (Nails), and Directions

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Weight(s)
Paint
COMMENTS:
The following items are handy for building and displaying your
    automobile: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Building & Racing Reserve
PINY1382--Racer Show Stand

Get this product to boost the one you are reading about.



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
An unique mix of micron size graphite particles formulated to
    minimize the coefficient of friction and give your automobile the winning
    edge.
High in carbon material, give it exceptional lubricating characteristics.
Will not bring in dust and dirt.
Perfect dry lubricant for application on most surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECS:
Net Weight: .25oz (7.1g)

Get this product to boost the one you are reading about.



These are Very Speed Axles from PINE-PRO Competitors Components.
Suitable for Age 8 & Older.

FEATURES:
Light-weight aluminum construction.
Nail-type design.
Detailed directions and handy hints.

INCLUDES:
(5) Axles

COMMENTS:
The following items are handy for building and displaying
    your automobile: Pro-Body Tool
Building & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Show Stand (PINY1382)

This product is frequently gotten with the above stated product.

Eliminator Custom Parts

This is the "Eliminator" Customized Components Set from Pine Car.

FEATURES:
Customized Components such as drivers, engines and pipes, rollbars and more
    can easily transform an easy automobile project into an interesting work
    of pride!
Extremely flexible and can be utilized on many different styles of cars.
Cast metal parts.
Includes two exhaust pipes, one engine and one spoiler.

INCLUDES:
One "Eliminator" Customized Components Set

REQUIRES:
Cement

Here is another product that praises the product being talked about.

Alignment Tool

This is a Positioning Tool from Pine Car.

FEATURES:
This tool might be utilized with any gravity race automobile whose general
    maximum measurements are 7" long, 2-3/4" wide, and require 3/8"
    clearance from track to lowest point on automobile body.
Perform 7 checks:
    Check axle slots for alignment.
    Check clearance between wheel and automobile body.
    Avoid camber.
    Check toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Alignment Tool

This is a fantastic addition to the product presently being talked about.

Strip Weight 2 oz

This is a Set of 2oz Strip Weights from Pine Car.

FEATURES:
The heavier your automobile, the faster it goes.
Incremental weights permit you to change you automobile's weight, even on
    race day.
Break off the amount of weights you require, using pliers.
Attach weight to the bottom or countersink it under the car.
Includes screws.
Carded packaging with directions on rear.

INCLUDES:
One Set of 2oz Strip Weights

REQUIRES:
Pliers

SPECS:
Length: 3-1/2" (98mm)
Width: 5/8" (16mm)
Weight: 2oz (56.7g)