Pinecar Alignment Tool

This is a Positioning Tool from Pine Car.

FEATURES:
This tool may be used with any gravity race automobile whose general
    optimum measurements are 7" long, 2-3/4" broad, and require 3/8"
    clearance from track to lowest point on automobile body.
Perform 7 checks:
    Examine axle slots for positioning.
    Examine clearance between wheel and automobile body.
    Avoid camber.
    Examine toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Alignment Tool

This product praises the main item below.



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
A special mix of micron size graphite particles developed to
    lower the coefficient of friction and offer your automobile the winning
    edge.
High in carbon content, offer it remarkable lubricating characteristics.
Will not attract dust and dirt.
Perfect dry lubricant for application on many surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECIFICATIONS:
Net Weight: .25oz (7.1g)

This product is frequently bought with the above mentioned product.

Round Weight 2 oz

This is a Set of 2oz Round Weights from Pine Car.

FEATURES:
The heavier your automobile, the faster it goes.
Incremental weights permit you to adjust you automobile's weight, even on
    race day.
Drill 3/8" (9.5mm) size hole in the automobile and set up the weight.
Carded packaging with directions on rear.

INCLUDES:
One Set of 2oz Round Weights

NEEDS:
Pliers

SPECIFICATIONS:
Length: 2-1/2" (64mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)

Want an additional terrific product to compliment the above mentioned product?



These are Super Speed Axles from PINE-PRO Competitors Components.
Suitable for Age 8 & Older.

FEATURES:
Lightweight aluminum construction.
Nail-type design.
Detailed directions and useful hints.

INCLUDES:
(5) Axles

REMARKS:
The following products are useful for structure and showing
    your automobile: Pro-Body Tool
Building & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Show Stand (PINY1382)

Want an additional terrific product to compliment the above mentioned product?

Formula Glue .5 oz

This is .05 oz Formula Glue by Pine Car.

FEATURES:
Hi-tack pastime glue that is fast-setting for instantaneous hold, gap-filling
    to adhere irregular surface areas and impact-resistant due to the fact that it does not
    end up being brittle.
Dries clear as glass.
Non-toxic, non-flammable and no hazardous odors.
Use on wood, metal, plastic and painted surfaces.

INCLUDES:
One Bottle of Solution Glue.

SPECS:
.5oz (15ml)

This product praises the above discussed product.

Basic Car Kit

Develop Your very own Original Vehicle Design with the Basic Block Kit from PineCar.

FEATURES:
Carefully chosen, fine-grained soft wood.
Easy to shape and sand.
This block of wood serves as the platform on which you will design
    and construct your derby car.
Ideal for those who wish to create their own distinct design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, Two Strong Axles, 4 Wheels,
Five Wheel Retainers, 4 Axles (Nails), and Instructions

NEEDS:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealer
Drill
Weight(s)
Paint
REMARKS:
The following products are useful for structure and showing your
    automobile: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Building & Racing Schedule
PINY1382--Racer Show Stand