Pinecar Alignment Tool

This is an Alignment Tool from Pine Car.

FEATURES:
This tool might be utilized with any gravity race vehicle whose general
    optimum measurements are 7" long, 2-3/4" large, and need 3/8"
    clearance from track to lowest point on vehicle body.
Perform 7 checks:
    Check axle slots for positioning.
    Check clearance between wheel and vehicle body.
    Prevent camber.
    Check toe-in and toe-out.
    Length.
    Width.
    Clearance.

INCLUDES:
One Alignment Tool

This thing praises the main item right here.



This is a .25oz Tube of Graphite
from Pine-Pro Competitors Components.

FEATURES:
An unique blend of micron size graphite particles created to
    decrease the coefficient of friction and provide your vehicle the winning
    edge.
High in carbon content, provide it remarkable lubricating characteristics.
Will not attract dust and dirt.
Perfect dry lubricant for application on the majority of surfaces.

INCLUDES:
One .25oz Tube of Graphite

SPECIFICATIONS:
Net Weight: .25oz (7.1g)

This thing is often acquired with the above discussed thing.

Round Weight 2 oz

This is a Set of 2oz Round Weights from Pine Car.

FEATURES:
The much heavier your vehicle, the much faster it goes.
Incremental weights allow you to adjust you vehicle's weight, even on
    race day.
Drill 3/8" (9.5mm) size hole in the vehicle and set up the weight.
Carded product packaging with directions on rear.

INCLUDES:
One Set of 2oz Round Weights

REQUIRES:
Pliers

SPECIFICATIONS:
Length: 2-1/2" (64mm)
Width: 1" (25mm)
Weight: 2oz (56.7g)

Want an additional terrific thing to enhance the above discussed thing?



These are Incredibly Speed Axles from PINE-PRO Competitors Components.
Suitable for Age 8 & Older.

FEATURES:
Light-weight aluminum construction.
Nail-type design.
Detailed directions and handy hints.

INCLUDES:
(5) Axles

COMMENTS:
The following products are handy for building and showing
    your vehicle: Pro-Body Tool
Building & Racing Book (PINZ1383)
Dry Transfer Burnisher (WOOU2600)
Sanding Block (PPRY1035)
Racer Show Stand (PINY1382)

Want an additional terrific thing to enhance the above discussed thing?

Formula Glue .5 oz

This is .05 oz Formula Glue by Pine Car.

FEATURES:
Hi-tack pastime glue that is fast-setting for instantaneous hold, gap-filling
    to adhere uneven surfaces and impact-resistant due to the fact that it does not
    end up being brittle.
Dries clear as glass.
Non-toxic, non-flammable and no harmful odors.
Use on wood, metal, plastic and painted surfaces.

INCLUDES:
One Bottle of Solution Glue.

SPECS:
.5oz (15ml)

This thing praises the above reviewed thing.

Basic Car Kit

Develop Your Own Original Automobile Design with the Basic Block Kit from PineCar.

FEATURES:
Carefully chosen, fine-grained soft wood.
Easy to shape and sand.
This block of wood works as the platform on which you will develop
    and build your derby car.
Ideal for those who want to develop their own special design.
Pre-cut axle grooves.

INCLUDES:
One 7"x1-1/4"x1-3/4" block of wood, Two Strong Axles, Four Wheels,
Five Wheel Retainers, Four Axles (Nails), and Directions

REQUIRES:
Coping Saw or Hand Saw
Sandpaper (80 grit, 120 grit, 220 grit)
Wood Sealant
Drill
Weight(s)
Paint
COMMENTS:
The following products are handy for building and showing your
    vehicle: WOOU2600--Dry Transfer Burnisher
PPRY1035--Sanding Block
PINY1357--Wheel Turning Mandrel
PINZ1383--Building & Racing Schedule
PINY1382--Racer Show Stand